Anybody using 17 inch 4x100 Fleabay reps?

[atomic]

These are the 10 spokes from IE and certain EBAY sellers. The car still can not move because I am in the middle of timing belt/water pump/and all hoses and belts right now and then the A/c overhaul and master cyl replace. I will be posting more in the next few weeks but right now thats about the best I can do for you. Thanks for the comments

[atomic]

You can go here and see the few other pictures I took the other day but the one posted here was the better angle of all of them they are about half way down tha page

http://www.r3vlimited.com/board/showthread.php?t=91993&page=2

[Lair]

Those wheels look perfect on a dark colored E30. I already have a bid in. What size tires are you running?

I hope my g/f likes them after I bolt them on. ;-)

[bmw325csi]

here is how they look on my ladys e36 if anyone cares, but these are masitaly's.

[atomic]

I am running 215/40-17 with H & R races on GC koni adjustables

[schmidty]

these are 16's but look far better than any of those 17's

BeBeS :p RS replicas

http://cgi.ebay.com/ebaymotors/BMW-16-E30-Wheels-Rims-BeBeS-RS-Style-Direct-Fit_W0QQitemZ120144962795QQihZ002QQcategoryZ43956QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Garageaholic]

It looks like those wheels are sportin' alot of pseudo - lip.....

Not to mention, the more spokes you get, the more you have to clean.... and cleaning all those spokes it not fun, especially when they are supposed to shine like my signature, which shows wheels that are a bitch to clean and am getting tired of doing it because my fingers get cut up from all the crevises in there and i've only done 1 wheel with 4 cuts on each hand and i have 3 fuckin wheels to go and it's been about 45 minutes so doing 3 more wheels will be about 3 hours of detailing my car and i only did the WHEELS!

[Lair]

You need one of these:

[Lair]

Bought a set. They'll be shipped out tomorrow. I also picked up a set of Fuzion ZRi tries in a 205/40/17 size. I hope the tires aren't too short.

Those are the ones.

[schmidty]

Bought a set. They'll be shipped out tomorrow. I also picked up a set of Fuzion ZRi tries in a 205/40/17 size. I hope the tires aren't too short.

205/40/17 is ideal... at least it is for my Kopi's

[atomic]

205's are just over a half inch shorter in height compared to factory 195/65-14 tires and 215 are closer to factory height tires and are shorter by almost a 1/4 inch. Personally the 215's look better and will give you the most accurate reading on the speedo.

Here is a tire size link http://www.discounttiredirect.com/di...dJQnjwWsNkYYZW

[Lair]

205's are just over a half inch shorter in height compared to factory 195/65-14 tires and 215 are closer to factory height tires and are shorter by almost a 1/4 inch. Personally the 215's look better and will give you the most accurate reading on the speedo.

Here is a tire size link http://www.discounttiredirect.com/di...dJQnjwWsNkYYZW

I used a set of Fuzion ZRi tires on my E36 M3 last time, and they were a bit taller and meatier than the Michelins that I used before. I hope the 205/40's are the same. I hate a big gap.

I'll do 215's on my next set.

[northmiler89]

anyone know if the RS reps are actually 2 pieces? Wouldnt mind painting the centers red and the lips powdercoated black :D

[Slick92GS-R]

check out bimmerworld.com and go to the wheels section

team dynamics assortment light & strong


http://store.nexternal.com/shared/St...t=products.asp

[Lair]

Got 'em in, and got 'em on. The girlfriend doesn't like them, but I think they're pimp.

The front needs a 1.5 to 2 inch drop and it'll be golden.

If she keeps bitchin', I'm going to put them on my project cab and slam it.