OZ Superleggera 17" ET37?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SpeedyWeber
    Noobie
    • Jul 2007
    • 23

    #1

    OZ Superleggera 17" ET37?

    I found a set of 17x7 Superleggeras brand new never mounted on Vortex. They are et37. I plan on running 215/40's, gathered information from reading others posts. So I am assuming I should pick up a set of H&R 15mm spacers for them with 57.1 hubs, correct? This would give me et22 then which would fit?

    Out of curiosity, why when looking at wheels on Tirerack would they list a 17x7 BBS with et37 as proper fitment for an e30? I'm assuming that's not taking into consideration lowering the car and that's why et20-25 would be better?

    The car isn't lowered yet, but will be as soon as I decide on what springs to buy. While I'm on the subject, anyone have feedback on Intrax springs? After taking measurements of the gap I have now I'm looking to go around 2" in the front and 1" in the rear, or somewhere in that neighborhood. Any suggestions?
  • Bill-B
    E30 Fanatic
    • Apr 2007
    • 1242

    #2
    Use spacers, those wheels are sex
    Originally posted by NavyE30
    I saw Vlad was posting and got excited. Then I saw there weren't any boobs and was sad.

    Comment

    • Mystikal
      Moderator
      Wheel Fitment Expert
      • Nov 2003
      • 9602

      #3
      1. 15mm spacers are perfect.
      2. You will also need hubcentric rings.
      3. When you order from Tirerack they ship the wheels with spacers.
      4. Get IE Stage 3 springs, Koni SA dampers, and run a 10mm spring pad in the rear.

      Jay

      Comment

      • SpeedyWeber
        Noobie
        • Jul 2007
        • 23

        #4
        Thanks for the replies.

        IE springs, I saw those and was considering them, I'm a little afraid they might be too harsh, especially with a 40 series tire on a 17. I may have to reconsider how far I lower it.

        Comment

        • Axxe
          No R3VLimiter
          • Aug 2004
          • 3355

          #5
          They will not be too harsh. Unless you pair them with bilsteins.


          Keep it slideways!!

          Comment

          • SpeedyWeber
            Noobie
            • Jul 2007
            • 23

            #6
            Originally posted by Axxe
            They will not be too harsh. Unless you pair them with bilsteins.
            Well, I definately need shocks. I just bought this car a month ago to use as a d/d but I can't leave anything I own stock. The car has the factory shocks which are shot with 150k on them. What shocks would you suggest then?


            Found a photo of my old WRX with gold superleggeras on it, thought I would share.

            Comment

            • SpeedyWeber
              Noobie
              • Jul 2007
              • 23

              #7
              I forgot to ask, who is a good source for spacers and rings, and I'm assuming I'll need longer wheel bolts?

              Comment

              • ZiMMie
                E30 Modder
                • Jun 2004
                • 968

                #8
                17X7 that is soo puinney.
                Dont bother unless its wider.

                www.stancefactory.com

                Comment

                • Mystikal
                  Moderator
                  Wheel Fitment Expert
                  • Nov 2003
                  • 9602

                  #9
                  Originally posted by ZiMMie
                  17X7 that is soo puinney.
                  Dont bother unless its wider.
                  OMG you're the new Rob89M3.

                  SHUTUP! Some people like wheels/tires to drive hard!

                  Jay

                  Comment

                  • SportEvo
                    Member
                    • Dec 2010
                    • 56

                    #10
                    Originally posted by Mystikal
                    OMG you're the new Rob89M3.
                    Nope, Im still here.

                    Rob :hitler:

                    Comment

                    • Ray Smoodiver
                      Moderator
                      • Jun 2004
                      • 8809

                      #11
                      Originally posted by SportEvo
                      Nope, Im still here.

                      Rob :hitler:
                      No one cares. Seriously.

                      Go back to spinning your car into things.

                      SILBER COMBAT UNIT DELTA (M-Technic Marshal)
                      RTFM:http://www.r3vlimited.com/board/showthread.php?t=56950

                      Comment

                      Working...