16x8 steelies on my e30

[Mystikal]

Thank you so much. I just want to recap.
I can order 16x8 steelies, with 3" backspacing and mount them on 215/40/16 without spacers. That will give me a slightly staggered/wide look?
Once I have confirmation, I'll place my order, can't wait to mount that set up.

After thinking about it a bit, shouldn't I have et20 in the front and et15 in the back? Right now I have 31mm spacers in the back on my 14x6 bottle caps and I don't rub (in the back) and 20mm spacers on same bottle caps (in the front)
The wheels don't really stick out much but I understand they are 14's and that might make a diffenrence as well.
Just making sure I'm thinking correctly here.
Again, thanks for your help, and patience ;-)


Thanks again

If you want them staggered, then sure, get like 2.75" on the back. But the rear fenders actually have LESS room than the fronts with our cars, and the specs I gave you should work without much rolling needed.

Jay

[naika]

it is not necessary,but is possible that rear wheels will rub... and it along tires too... I had problem with Pirelli PZero tires,but with Toyo Proxes not in the same size

I'l place my order for that size and will work on the fender rolling then.
I hope the stretched tires will help prevent the rubbing.

Thanks guys for the input.
I just noticed the sticky for wheel fitment questions.

Sorry ;-)

Mystical, I just found a chart online that helps figuring out offset based on wheel width and backspacing.
Here is the link, it seems like a negative 12 offset is around 4" backspacing. Does that make sense?

https://rsracing.com/tech-wheel.html

Thanks

[naika]

If you want them staggered, then sure, get like 2.75" on the back. But the rear fenders actually have LESS room than the fronts with our cars, and the specs I gave you should work without much rolling needed.

Jay

Hi,

I just called to order and the guy told me that a 15mm offset on the rim would be the equivalent of a 5" backspacing. Can you please confirm since it seems like you were suggesting like a 3" backspacing?

I have to confirm my order and I don't want to end up with wheels that are way off.

THanks again for your help with this.

[golde30]

Hi,

I just called to order and the guy told me that a 15mm offset on the rim would be the equivalent of a 5" backspacing. Can you please confirm since it seems like you were suggesting like a 3" backspacing?

I have to confirm my order and I don't want to end up with wheels that are way off.

THanks again for your help with this.

et0 would be 4" backspacing on a 16x8. so et15 is like 4.5" backspacing.

[naika]

et0 would be 4" backspacing on a 16x8. so et15 is like 4.5" backspacing.

Cool, thanks a lot.
He just called me back and said the best they can do is a 6-7 mm offset on those wheels and I went for it.
I guess I'lll have to roll the fenders, it should still be easier than fitting a sportmax with a ET0
Thanks guys for all the input, I think I got it all in place now.
I'll post pics when wheels are received.

[e30this]

yeah and if you dont like them and they dont work out I will have to rock them on my e30 :)
I might have to buy your spacers from you too ...

[naika]

yeah and if you dont like them and they dont work out I will have to rock them on my e30 :)
I might have to buy your spacers from you too ...

You're funny, I got some 17's for you if you'd like.... Black on chrome lips too.

[Mystikal]

Hi,

I just called to order and the guy told me that a 15mm offset on the rim would be the equivalent of a 5" backspacing. Can you please confirm since it seems like you were suggesting like a 3" backspacing?

I have to confirm my order and I don't want to end up with wheels that are way off.

THanks again for your help with this.

Whoa, not only did I read the chart wrong (-12 instead of 12) but I typed 3" instead of 4". Holy shit.

Yeah, 5" is what I meant. Your link isn't working for me, but I used this chart:



Jay

[Mystikal]

Cool, thanks a lot.
He just called me back and said the best they can do is a 6-7 mm offset on those wheels and I went for it.
I guess I'lll have to roll the fenders, it should still be easier than fitting a sportmax with a ET0
Thanks guys for all the input, I think I got it all in place now.
I'll post pics when wheels are received.

Run 205/45/16.

Jay

[naika]

Run 205/45/16.

Jay

Thanks for the confirmation. I actually already ordered my 215s , they are on the way.
I will most likely roll the fenders since the best they could do for the wheel offset was something like a et6 or et7 which gives me around 4 3/4" backspacing.

What would you recommend for springs to drop the car to a nice stance.
I have Intrax springs right now, I like them but they are not low enough I assume.
I was thinking coil over and stuff but that's pricey and a lot of work to install.
Maybe a 60/40 mm drop, if I can find that somewhere?

Thanks

[Mystikal]

Thanks for the confirmation. I actually already ordered my 215s , they are on the way.
I will most likely roll the fenders since the best they could do for the wheel offset was something like a et6 or et7 which gives me around 4 3/4" backspacing.

What would you recommend for springs to drop the car to a nice stance.
I have Intrax springs right now, I like them but they are not low enough I assume.
I was thinking coil over and stuff but that's pricey and a lot of work to install.
Maybe a 60/40 mm drop, if I can find that somewhere?

Thanks

Yeah, you're gonna have to roll the fenders well to get that setup to work with 215s.

A good 60/40 drop is the FK spring/shock kit. It's a setup not many North American E30 guys use, but it's good.

Jay

[sticksdaman]

where do they sell the fk kit?

[Mystikal]

I think Tunershop does.

Jay

[naika]

I think Tunershop does.

Jay

They have a TS spring kit that is 55/35mm, how are those, I don't know this brand

[naika]

Got my wheels, they look good, but as expected, I have to drop the car a bit more. I am also having problems clearing the brakes in the front. A little grinding and 5mm spacer will solve that problem.
I will post pics once I am done with the install.
Anybody know where to get a 60-40mm spring set up or even a 60-50 set up?