dr20 15x7 need some spacer help.

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • JasonC
    replied
    My pads are not that new but do have some pretty good thickness to them. I'll guess i'll find out once my lugs get here tomorrow. If they really do clear for me or not.

    Leave a comment:


  • 1991 e30 bmw 318is
    replied
    Originally posted by JasonC
    I got the same ones, and he said they cleared the caliper. I have not put mine on the car yet cause the lugs was not sent with my order. But i did just go out and flop them on there with out the lugs and held it tight, and it looks like it does clear on mine though.

    ya mine looked like it did tell it was snugged up. and the bolts are too long. they hit the dust shield on the disc, and that was with a 3mm spacer. are your pads old or newer? if you put new ones in it might hit your rims.

    Leave a comment:


  • JasonC
    replied
    I got the same ones, and he said they cleared the caliper. I have not put mine on the car yet cause the lugs was not sent with my order. But i did just go out and flop them on there with out the lugs and held it tight, and it looks like it does clear on mine though.
    Last edited by JasonC; 03-04-2008, 01:43 PM.

    Leave a comment:


  • 1991 e30 bmw 318is
    started a topic dr20 15x7 need some spacer help.

    dr20 15x7 need some spacer help.

    i got the set on this site, and they just hit the front caliper with a 3mm spacer they clear but are out side the fender a little. have bavauto springs and billy sports. i think i'm going to get 195 55 15's think ill have problems with the front rubbing? and i have hub centric rings with the rims will i just get a universal spacer or will it need to be hub centric on it? pics later tonight.
    Last edited by 1991 e30 bmw 318is; 03-04-2008, 04:41 PM.
Working...