Announcement

Collapse
No announcement yet.

What size spacers for stock basketweaves?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    What size spacers for stock basketweaves?

    What's a good size spacer for stock basketweaves on a lowered car (H&R sports)? I don't want fender rubbing issues, but I want to push my wheels out so they don't look like they're trying to hug my transmission tunnel.

    #2
    I've seen 15mm ones make them look pretty badass.
    Originally posted by Gruelius
    and i do not know what bugg brakes are.

    Comment


      #3
      I thought someone on here was running 20mm spacers with stock weaves.
      Need parts now? Need them cheap? steve@blunttech.com
      Chief Sales Officer, Midwest Division—Blunt Tech Industries

      www.gutenparts.com
      One stop shopping for NEW, USED and EURO PARTS!

      Comment


        #4
        I think 20mm will fit. I may have to roll the fenders, but meh....

        Comment


          #5
          15mm will handle up to 205/60/14.
          20mm for 195s.

          No rolling for either.

          Comment


            #6
            Originally posted by Mystikal View Post
            15mm will handle up to 205/60/14.
            20mm for 195s.

            No rolling for either.

            If you go 15mm spacer, what longer lug nuts size should you get?

            Comment


              #7
              Dunno, people tend to just order them together. I think Turner just asks if you want to add bolts to the order.

              Comment


                #8
                I'm getting my spacers made by a friend who owns a machining business, for about half of what everyone else charges. So I'll need longer bolts, or studs. Which is better?

                Comment


                  #9
                  Just depends, if you plan on swapping wheels alot, or just want them to be easier to put on if you have take them off go studs.

                  Originally posted by aworthybrother View Post
                  If you go 15mm spacer, what longer lug nuts size should you get?
                  If you get a 15mm spacer, you need 15mm longer bolts. Because the wheel is now 15mm farther from the original hub face.
                  Need parts now? Need them cheap? steve@blunttech.com
                  Chief Sales Officer, Midwest Division—Blunt Tech Industries

                  www.gutenparts.com
                  One stop shopping for NEW, USED and EURO PARTS!

                  Comment


                    #10
                    Stuuuuuuuuuuuuuuuuuuds

                    Comment


                      #11
                      Originally posted by Danny View Post
                      Stuuuuuuuuuuuuuuuuuuds


                      Only way to go... IMHO

                      Comment


                        #12
                        Not stock weaves but 15" Corrado G60 wheels with the same width and offset(6.5 ET33). I have 17mm spacers up front and 20's in the rear with 205/50's


                        I could probably go 25 in the rear without problems with mildly rolled fenders. I probably would but I plan on ditching these wheels soon.

                        You parked next to me at the Eugene BBQ in July.

                        Comment


                          #13
                          i had 20mm in front with studs and 35mm in the back with studs running 14" weaves with stock tire size, lowered on eibach springs and it looked perfect, did not have to roll the fendrers, no rubs or anything.

                          Comment

                          Working...
                          X