Originally posted by Danny
View Post
Announcement
Collapse
No announcement yet.
BBS Garage: All things BBS
Collapse
This is a sticky topic.
X
X
-
Originally posted by Nicademus View PostI thought I got a good deal for mine but after reading about $100 and $200 RM's I'm feeling buyers remorse :(
Is that VVV a legit way to straighten wheels? It seems like that might dent the other side too? How do the "pros" do it?
Comment
-
Originally posted by Eurospec View PostMy rs001's
Gawd I luv RS'
Comment
-
Originally posted by Eurospec View PostThey're 15x7 et25 with original 1" lips.
Comment
-
Originally posted by Eurospec View PostThey're 15x7 et25 with original 1" lips.
Comment
-
from my buddy's collective BBS info..
as of October 07, these are places where you can get BBS related stuff:
Center caps and such
RTH has the valve caps, they have badges too but not sure if they are the ones you want.
try BFI for the caps.
http://store.blackforestindust....html
or PMS
VW and Audi repair, service, performance parts, tuning & diagnostic mechanics. We are located in Miramar, San Diego & specialize in performance tuning, parts, service for these German vehicles.
places to buy lips:
http://www.rkimporting.com/accessories.htm has Schmidt lips for 135 each. bolts for RS and RM's around $190, cone or hex flat caps for $225 see price sheet here
http://www.tunershop.com sells Schmidt lips for 529$ total. that INCLUDES shipping. this is the best price I have found, and it is where I ordered mine from, it took about two weeks or so from the UK and these lips are absolutely GORGEOUS.
tunershop also sells ATS cups brand new for about 250$ a pop.
http://www.blackforestindustries.com sells gold bolts for $1.35e. image lips $159e. or about $658 for a set shipped.
http://www.imagewheels.co.uk charges 760$ for four lips shipped.
http://justmatz.co.uk has alloys lips for about 640$ for a set, plus 90$ shipping. they also sell STAINLESS lips for 226$ each, which they say are heavier but are super strong. they also sell centers, bolts, rebuilt wheels and so on. I dont know who makes the lips they sell.
Warning about buying centers. when you buy flatcaps and whatnot, they do NOT come with the metal trim ring. you will have to locate those separately.
Valve Stems:
First: BBS valve stems are .300 inches in diameter. Schmidt lips have the correct hole for these. considered the "small sized hole". I believe you can get Image or Kodiak lips with either size hole. .300 or .476(I think)
Anyway.
I really wanted a set of flushmount valve stems and I shopped all over for them. I tried to order from JCwhitney, but ended up buying a set on ebay. I have to say that the seriously low quality of these things has turned me off to them. the crappy chrome finish on them detracts from the look of the wheel so bad that I would rather have a rusty old stump sticking out than these ugly flushmounts. to make matters worse, they were too large, would require drilling to fit in the rim, and they were so wide that the top would need to be grinded down to fit in the recess of the lip.
so I went to the Harley dealership and picked up a set of low profile screw in valve stems. they aren't all that pretty, but they will work. they shouldn't look too bad when I have a nice valve cover over them too.
These cost 7$ a piece, but I am sure you could track them down for less money some place else.
Tools:
it seems some people have trouble finding an 8mm 12 point socket. Have you tried Sears? that is where I got mine. they have an entire wall display filled with individual sockets of all sorts of sizes, points, and so on. I checked home depot and was able to find them there as well. you could also call up your local snap-on guy and have them deliver one right to your house.
there was mention of a fiberglass lined socket wrench that was supposed to be safe on the bolts finish, but they are not made anymore. but if if you take your time and keep your ratchet straight you should not damage your finish.
torque specs
BBS RM bolt torque is 12-15 lb/ft
BBS RS bolt torque is 144in/lbs /12ft/lbs.
The following pertains to RM012s only. When widening:
6.5" = ET 33
7" = ET 26.7
7.5" = ET 20.3
8" = ET 14
8.5"= ET 7.6
9" = ET 1.3
9.5" = ET -5.1
10" = ET -11.5
BBS of America, Inc.
5320 BBS Drive,
Braselton, Georgia 30517
USA
Tel.: 770.967.9848
Fax: 770.967.9866
E-Mail: marketing@bbs-usa.com
North American Wide Lip Source:
Kodiak Motorsports
#1 - 30455 Progressive Way
Abbotsford, BC Canada
V2T 6W3
Tel: 877.856.7311, Pacific time (ask for Daryle or Carol)
E-mail: sales@kodiakmotorsports.com
Web: http://www.kodiakmotorsports.com
United Kingdom Wide Lip Source:
Image Wheels International, Ltd.
3 Fountain Lane, Tipton
West Midlands
DY4 9HA
Great Britain
Tel: (UK) 0121 522 2442
Fax: (UK) 0121 520 9311
E-mail: imagewheels@btinternet.com
Web: http://www.imagewheels.co.uk
General Pricing:
For a 15" diameter 2" lip: $78 USD (Image's price of 66 pounds is about $110 USD each, not including shipping from Europe). Shipping is where the big savings should be with Kodiak. Without shipping charges, (4) 2" lips are $312. On average, the total has been about $359 for (4) 2" lips, and a tube of sealant, shipped.
Lip Size to New Wheel Width:
0.5" lip = 6.5" overall (standard BBS RMs)
1.5" lip = 7.5" width total
2.0" lip = 8.0" width total
3.0" lip = 9.0" width total
Preferred Tire Sizes:
Optimum/preferred 15" tire size for 8" wide wheel: 195/45-15 (front/rear)
Optimum/preferred 15" tire size for 9" wide wheel: 205/40-15 or 215/40-15(rears)
You'll have to go overseas for the rears, though in a 9" size. Not available in the US for some reason even though most tire manufacturers sell them, just not here. Pretty much your only option in the U.S. is 195/45-15 or 195/50-15 front and 205/50-15 rear.
Toyo makes the Proxes T1-S in the 215-45 that is readily available in the States.
You can get Toyo Proxes T1S in 195/45-15 for about $125 ea. from these two places:
Partner with the leading distributor of automotive tires, parts, and lubricants. We carry all the major brands. Get what you need when you need it.
195/45-15 Kuhmos (not a great performing tire) have been spotted selling for $50 ea.
http://www.tirerack.com carries: Kumho ECSTA Supra 712 for $71 each in 195/45-15
Discount Tire Direct (http://www.tires.com) carries no tire in 195/45-15
Tire Heights:
215/45/15 will be 22.6" tall in total
205/40/15 will be 21.4" tall in total
205/50/15 will be 23.1" tall in total
195/45/15 will be 21.9" tall in total
195/50/15 will be 22.7" tall in total~Rogan
'85 325e w/M42 swap
'02 WRX 2.5L Hybrid w/GT32 @ 20psi - 400+awhp :: SOLD
http://www.autismspeaks.org ||| http://www.essentialpieces.org
sigpic
Strategic Alpine Command
Diving Board Division
Comment
-
Wheel Lip Manufacturing Process:
The parts that we make are made from 6061 aluminum and go through many steps to ensure their strength. Pot holes will only hurt your wheels if you do not have enough air pressure. Even if you had steel wheels they would bend if they came in contact with the ground. Kodiak parts are available in .500" increments from 1 inch to 10 inches wide. The width of the rim shell doest really have any effect on the strength until you get into very high loading vehicles. Kodiak rim shells are spun formed. It makes the part the strongest it can be by forging the sheet into the wheel shape. The rims are made from 6061-T6 aluminum and are .190" thick. They are machined on a vertical CNC and then polished to a mirror finish. Kodiak has made a variety of different profiles in the past but they now do almost everything using the J (ISO) contour. This contour is the most common and makes it easy for tire mounters.
Valve Hole Size:
Kodiak drilled some lips with the standard wheel size then thought it might be better to leave the hole the same size as stock BBS. If you want to go to a standard size just run a drill bit through the hole. It is easy and anyone can do it. The standard size for a valve hole is .431" so a 7/16" drill bit (.437") will work just fine.
Bolt Pattern & Bolts:
Both the BBS RSs and the RMs have 30 bolts per wheel, and they are the same bolt pattern. 17s should have 35 bolt holes. Torque bolts in a crossing star pattern, just like you would do with lug bolts.
BBS RM bolt torque is 12-15 lb/ft
BBS RS bolt torque is 12 lb/ft
NOTE: Some individuals have suggested that 18 lb/ft is a more reasonable torque setting when re-using old bolts on BBS 3-piece wheels. Use these numbers at YOUR OWN RISK.
Disassembly and Assembly information:
Taking apart your wheels is a piece of cake. It only requires common sense and a little patience. Kodiak suggests to it's racing customers that they take apart and inspect there wheels every year. [This is probably not needed on a street tire.] We have yet to have anyone that hasn't been able to do it on their own. It is important to make sure that the parts are clean when they are reassembled.
Use a 12pt 8mm socket on the bolts and heat the lips up with a heat gun for 5-10 minutes before going at them with a rubber mallet. It should take no longer than 2 hours to have them all apart.
Use a decent 3/8 drive torque wrench and use a crossover method for tighening. After you torque the wheels put a bead of silicone adheasive over the seal on smooth it out. If you are really worried about leaking just put a very thin coat on one day and follow it up with a second coat 24 hours later.
Sealing Wheel Shells:
1. Clean the mating surfaces with laquer thinner and let dry.
2. Bolt the two shells together "DRY" and torque to spec.
3. Lay thin bead of silicone in the crack between the mating surfaces and smooth. Let it dry overnight.
4. Re-apply a bead over the first and smooth out to about a 1.0" bead width and smooth.
If you follow this procedure your wheels will never leak. The reason you don't want silicone between the halves is because all silicone shrinks as it cures. As is shrinks the pressure between the shells changes and your torque changes. BBS use a different system. I wouldnt worry about how the silicone looks. Once you put a tire on you cant see it anyway. The last thing to want is to be driving down the road and get a flat because you didnt use enough sealant. Kodiak suggests to all of their customers that they recheck the torque after you run the wheels for the first time. Just make a few turns each way and quickly recheck (just check don't tighten more).
One recommended product for sealing wheel halves is called Toyota Seal 10* (can't remember the last number) also known as FIPG or as it sounds "Fipige." It is only available at the dealer, 3 oz. cost near 15 dollars, no silicone in it, I believe, but it will seal almost unsealable things. Generally, and good quality RTV silicone sealant will work perfectly, though. Dow Corning 832 Multi Surface Adhesive Sealant was also recommended. Kinesis Motorsports also recommends a sealant called, Shin-Etsu Silicone (1 Component RTV). This is available from Kinesis Motorsports directly.
Other Important Multi-piece BBS Information:
BBS wheel assembly information:
Euro source for BBS parts (tapered and flush centercaps, gold and chrome bolts, etc.):
The chrome BBS cap inserts are 70 mm cap inserts from either the LM, RK or RKII. From the Wheel & Tire Forum, Eric @ tirerack.com posted all the various BBS center cap combos.
BBS Center Cap Thread
On new bolts from BBS:
quoted $50 a wheel from BBS of America, to re-assemble the wheel with new titanium fasteners. They will NOT sell you bolts directly for liability reasons, but they will do them up for you themselves for a fee. This also includes new seals between the rim halves, too. It is unknown if they will assemble wheel pieces that they did not manufacture.
Flushfit valve stems:
Driven by passion, Demon Tweeks offers the most complete and innovative motorsport, car tuning & product range available worldwide. Browse our range today and enjoy express worldwide shipping.
Titanium, stainless and steel bolts for 2-3pc wheels:
Pertsch & Partner rund um´s Rad, die zur Montage von ein- und mehrteiligen Leichtmetall-Felgen (Alu-Felgen) benötigt werden, wie z.B. FELGENSCHRAUBEN aus Titan, Sonderedelstahl, Edelstahl, Stahl verchromt und vergoldet, ZIERSCHRAUBEN aus Titan und Edelstahl, MUTERN aus Edelstahl und Stahl, FELGENRINGE aus Aluminium und Edelstahl, FELGENSCHLÖSSER aus Titan, RADSCHRAUBEN aus Titan, Edelstahl und Stahl. Alle Titan- und Sonderedelstahl- Schrauben sind absolut korrosionsresistent (rostfrei) und besitzen die höchste Festigkeit.Last edited by Rogan; 09-07-2008, 06:04 AM.~Rogan
'85 325e w/M42 swap
'02 WRX 2.5L Hybrid w/GT32 @ 20psi - 400+awhp :: SOLD
http://www.autismspeaks.org ||| http://www.essentialpieces.org
sigpic
Strategic Alpine Command
Diving Board Division
Comment
-
Originally posted by Nicademus View PostWhere did you get them from? RS's are getting quite rare on the market.
Originally posted by lowlightbw View Postthose almost look like 1/2" lips, if youre wheels are stamped 15x7 then maybe your barrels are 6.5." sorry if im wrong :)
Here's a better angle, (don't mind my sig-- that's a 1/2" RM lip which has since been swapped with a correct 1" lip).
Comment
-
I don't have a set, but this would be alittle more info added to the thread.
- Model: RS 002
- Height/Width/Offset: 15x8 et12
- Purchased from: Junk yard
- Price: $35.00
- Prodution Date: 03/84
- Made in West Germany
1992 BMW 325iC
1978 Chevrolet Monte Carlo1965 Chevrolet Corvair Monza 140hp
Comment
-
Originally posted by JasonC View PostI don't have a set, but this would be alittle more info added to the thread.
- Model: RS 002
- Height/Width/Offset: 15x8 et12
- Purchased from: Junk yard
- Price: $35.00
- Prodution Date: 03/84
- Made in West Germany
It's alittle ruff.
Comment
Comment