BBS Garage: All things BBS

[IronmanE30]

were the lips polished or painted?

Polished Kodiak 2" wide lips. The nuts were also polished with new plastic logo caps. 3 piece wheel bolt and nuts were chromed. And I was wrong it was Wheel America in Buena Park, CA that did the finish work. I just called them to get which color of silver they used and they told me it was their secret. ha ha go figure. Sorry I didn't post all the details at first.

Cheers,

Jim

[image]

We had US Wheels use automotive paint for the center, rings and barrels.

Cheers,

Jim

Looks very good :up:

[Bizzas]

Hi to Everyone... Need Some Help Can find anywhere that
Tire Air Valve Bolt
Its from BBS RS2 (RS700) 18 inch ET22 5x120 Alloy
Can Anyone help??
Need centre cap for it as Well...
Thanks

[hexagone]

Yes, I've looked and seen, but I haven't seen enough.

Anyone with pictures of 15" RSs and chunky tires please post!

I'm thinking of running 15x8 all around with 205/50s or 55s for a very '90's setup'

[pwagon717]

Yes, I've looked and seen, but I haven't seen enough.

Anyone with pictures of 15" RSs and chunky tires please post!

I'm thinking of running 15x8 all around with 205/50s or 55s for a very '90's setup'

lowlightbw had some on his car, check him out.

[bimma360]

Yes, I've looked and seen, but I haven't seen enough.

Anyone with pictures of 15" RSs and chunky tires please post!

I'm thinking of running 15x8 all around with 205/50s or 55s for a very '90's setup'

Can't really help you with the RS's, but I ran 205/50s on 15x7.5 RM's with an et15 front and et20 rear. I had about 4mm spacers on the front to clear massive's street kit. Oh 1.5" lips by the way.

[IronmanE30]

Yes, I've looked and seen, but I haven't seen enough.

Anyone with pictures of 15" RSs and chunky tires please post!

I'm thinking of running 15x8 all around with 205/50s or 55s for a very '90's setup'

I have been working on fitment of 205/55 Falcon 912 on 8" RS001. You can see pictures here

http://www.r3vlimited.com/board/showthread.php?t=167033&page=5

I have the rears fitting but am having a little rubbing in the front so I am going to put a set of M3 CAB's on and see if that pushes the tire just a little forward so it won't rub on the rear inner fender.

If that does not work I will just put on some 205/50's.

Cheers,

Jim

[pilotskillse30]

I feel like a noob, what do you guys use (technique or material) to get your bolts out? I have a set of style 5 rc090 that i'm redoing, I've removed the faces and sent them off for redrill, but I cant seem to hit these bolts hard enough to remove them from the barrel. HHHHHHHEEELLLLP!!!!!!!!

[5ickride]

Need some info. What lugs do i use to mount these babys?

[alexd]

8)

[formula driver]

My latest creation...

There not finished, I may polish them some more and then they need to be bolted together.

I think they came out very nicely though.

Let me know what you think guys.

[brainspo0n]

it's a good day when you get a free set of BBS with caps

[kreasims]

My other BBS :)

[jason952]

wow

[diegom6]

My other BBS :)

I demand inof on this set! These are truly badass set & love it. I thought "this guys replied int he wrong forum....these are OZ Mitos" is what i thought at the very first look of them while scrolling down.