DZ1 sizing

[Sha1234]

Well my ronals are gone, and now with summer approaching i've decided on picking up a set of DZ exclusive DZ1's,
This is the plan,
9x16 et25 rears
7.5x16 et20 fronts
wrapped in toyo T1R rubber
225/40 rears
215/40 fronts
The question is, will this work without rolling fenders/spacers/modification?
suspension btw is KW 60/40 drop with koni SA's

and yes, i searched... then searched some more, and no actually sizing/offset was confirmed
Tim

[daniel]

weird, im pretty sure the rear wheels are supposed to have less offset than the fronts in a staggered setup.

the front setup is fine.

the rear concerns me a little bit if you got your offsets right. you will probably need spacers, and because of that you will probably need to roll your fenders. 225's are somewhat skinny on a 16x9 so you will have some stretch, which will help clear the fender.