19# injector source?

[Naplm00]

Well im looking for a set of new or fully rebuilt injectors

I'm guessing that i would need the 4 hole spray style

not sure on the impedence i would need...

saw a set of 6 for about 90 bucks

http://cgi.ebay.com/ebaymotors/19-lb-BMW-6-FUEL-INJECTORS-Z3-M30-E28-E30-E34-E36-19lb_W0QQcmdZViewItemQQ_trkparmsZ65Q3a12Q7c66Q3a2Q7c39Q3a1Q7c72Q3a1205Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ca2eca60cQQitemZ260431455756QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

can someone give me some guidance?

also if i plan to remove the intake mani to blast it, what gaskets would i need beside the obvious TB and block gaskets?

thanks

[bimmerboy08]

I use something similar on my car, you should be fine with those. not sure about your intake mani questions though.

[Naplm00]

do we take low or high impedeance injectors?

[Wh33lhop]

Those should work, as well as the Bosch type 3 (Mustang 5.0) injectors:



17lbers from an M50 or S50 would work also; I believe those are 3-pintle.

[Naplm00]

waffleswaffleswaffles that auction seem like a good price or should i look for lower?

ninja edit


also, is it worth it to spend he $$$ on brandy new injectors?

[tjts1]

These 19# bosch/ford injectors are all over the JYs. Its a 5 finger discount part. Any 97-2000 crown vic, thunderbird etc will have them.

[Wh33lhop]

I just got some used injectors since I'm on a meager budget and they came as a package deal with a mark d, but if I had the cheddar I'd go for the cleaned and flow matched ones (almost did anyway). The price is decent.

[e30pwr]

find a local 5.0 owner and ask? Thats how I got a set of 8 for free to rebuild

[Wh33lhop]

Yeah I know a guy who's got like 30 injectors, but I don't think he gave a shit about them and they were all in pretty bad condition. I just wanted to get some to put in immediately.

[ColdAccord]

i've got a set i'd sell. pm if interested

[tjts1]

There is no such thing as rebuilt injectors. Only ones that have been cleaned.

http://www.fordfuelinjection.com/?p=82

The skinny EV6 injectors pictured above never appeared on the 5.0 Mustang. They showed up in the late 90s modular OHC engines. In 2000 or there about Ford switched to a oval shaped plug so the 97-00 injectors are a relatively rare hybrid of EV6 injector with EV1 rectangular plug. You can also find these in 20, 22, 24, 30, and 36# in other cars from the same era... if you know where to look ;)
I have my M42 running on a 22# version with good results.

[Naplm00]

still think, im goin gto snag these offa ebay

seems worth it to know they have all new parts an were tested

[RobE30]

Thanks for the link on cleaning the injectors.... I'm going hunting;)

[kid325e]

I'm trying to source the injectors myself. I plan on picking them up used for cheap and getting them rebuilt the right way.

[Naplm00]

So i found a nice set of 19lb 14.4 ohm injecotrs

will thse be compatable with my 88 325ic?