Is www.rimpro.com dead for you?

[UNHCLL]

www.rimpro.com does it work for you?

Message time: 12:05AM Friday

[Brew]

negatory

[M-technik-3]

nope works for me.

[UNHCLL]

damn, back up again.

was down when i posted. :roll:

[DanGillan]

chris, if you need anything done for VRS or yourself, make sure you let me know, we have a hook up at rimpro, dan used to run it, let me know

[M-technik-3]

Prices have gone up substantially. $160 a wheel.

[DanGillan]

Prices have gone up substantially. $160 a wheel.

no check again, straightneing up to a 17 inch rim is still only $100, for all you suckers that is

[UNHCLL]

Prices have gone up substantially. $160 a wheel.

no check again, straightneing up to a 17 inch rim is still only $100, for all you suckers that is

Greg and I are looking into Refinishing. Straightening doesnt matter.

I've got ~12 to be done... + gregs 4 (at minimum)..... we'll see.

[M-technik-3]

Prices have gone up substantially. $160 a wheel.

no check again, straightneing up to a 17 inch rim is still only $100, for all you suckers that is

Right from their site.

Straightening

The most cost effective solution!
The existing wheel finish is maintained
The wheel still matches age/finish of others on the car!
Most bent wheels are repairable
Prices for Straightening:

Wheels up to 17"---$100
Wheels up to 18-19"---$135
Wheels up to 20" and up---Call
Call for wholesale prices!


Our strength is in our straightening. “The straightest wheel in the industry,” RimPRO has a proprietary process that has allowed us to bring wheels beyond “usable” to the near perfect specification of +/- .010” Our machines are designed to remove the dent, ding, or bend without the use of heat that can compromise the temper or composition of the alloy. ! RimPRO is in business to solve wheel problems.

Typically, this involves 1 of 3 options:
Download a copy of our Work Order Here!

Have a look at some of the cars we have done work on here!

Straighten: The customer has a vibration problem
Refinish/restoration: Includes straightening, the customer has an ugly wheel that has been scratched, oxidized, or run down a curb. We can swap out for a refinished wheel from stock or do their own.
Replace: If the wheel is badly damaged or not repairable, it can simply be replaced with a used wheel or an outright purchase of a refinished wheel.


Refinishing

The wheel is first checked in and visually inspected for cracks and bends. It is then straightened if necessary using our proprietary straightening process to within +/- .010 inch. It is then cleaned and sandblasted. Now, any missing pieces are welded back in, and machined down. Next the wheel is primed using top quality etching primer for the best possible adhesion and corrosion resistance. Then OE matched color is applied in two coats, and two coats of clear are applied over the color. The wheel is then cooked under a shortwave light for ultimate hardness and abrasion resistance. The final product is in fact of higher quality than the OE finish, and carries a lifetime warranty against chipping, peeling, or discoloration.

Painted or machined Wheels up to 17"--- $160
Painted or machined Wheels 18-19"--- $195
Painted or machined Wheels 20" and up--- Call for details
Polished wheels--- Starting at $195--- Call for details
Two or three piece wheels"--- Starting $295--- Call for details
Call for wholesale prices!

Like new finish at a fraction of the cost of a new wheel!
Removes unsightly oxidation, curb rash, and discoloration
Best color match in the industry!
Lifetime Warranty against corrosion and peeling!

[DanGillan]

i was looking at straightening

do you guys want to maybe tell me how many wheels you need done, and ill add mine to that, and ill see what I can do on a price, i know i can get a good hook up, so let me know timeframe and how many wheels

[UNHCLL]

depends on price.

I'd probably be in for 4... maybe 8. No need until spring, so any time over winter.

[M-technik-3]

depends on price.

I'd probably be in for 4... maybe 8. No need until spring, so any time over winter.

Exactly as mine are coming off car next week. And the VW shows up maybe next week.

[DanGillan]

ok guys, im gonna talk to tom and ill find out, 4-8 for chris, 4? for greg, and 4 for me over the winter, ill get back to you guys about cost of refinishing/straightening asap

[M-technik-3]

I will have one set that need's straightning and one set refinishing.

[DanGillan]

ok

ill get a price estimate for you guys asap