Who makes HID's for the e30?

[StereoInstaller1]

This is why I'm a golden god.

You are a "Golden God" because you got a Golden Shower over at Blunt Tech!

[red325]

This is page 2.

Not on my macbook....

[clavinZERO]

If I may: http://www.r3vlimited.com/board/showthread.php?t=132990

Lots of nice pics in that thread too! Good place to start IMO.

[Alkasquawlik]

internet sarcasm > OP

[z31maniac]

I cannot believe that a retarded thread with the question,Who makes HID's for the e30?, has made it to 4 pages.

This is page 2.

[Fidhle007]

If you have the U.S projectors, write down these steps:

1.Buy the U.S projectors ( if you don't have them, and no You can't fit HID's in a Stock SealedBeams)...
2. Get some HID (6000K kit, the bulb size is 9006 for the Stock U.S projectors, and H4 Bulbs for the Euro Smiley, Again this can't be done to Sealed beams)
3. Un-plug the connectors for the U.S projectors/Euro Smileys)
4. Put in the New HID Bulb inplace of the old Bulbs)
5.Plug the hids into the connectors for the Projectors.
6.Find a good spot for the "ballast" Zipties works awesome.
7.put everything back together.
8.turn on the lights and enjoy.

Basically if you get the 9006 with 35w or 55w kit, it should be a bolt on for the stock U.S projectors.

I hope this helps.

You're a retard.

[Danny]

Hey fuck you OP.

Just change your turn signal fluid, it will result in brighter headlights.

[bimmer_E30]

If you have the U.S projectors, write down these steps:

1.Buy the U.S projectors ( if you don't have them, and no You can't fit HID's in a Stock SealedBeams)...
2. Get some HID (6000K kit, the bulb size is 9006 for the Stock U.S projectors, and H4 Bulbs for the Euro Smiley, Again this can't be done to Sealed beams)
3. Un-plug the connectors for the U.S projectors/Euro Smileys)
4. Put in the New HID Bulb inplace of the old Bulbs)
5.Plug the hids into the connectors for the Projectors.
6.Find a good spot for the "ballast" Zipties works awesome.
7.put everything back together.
8.turn on the lights and enjoy.

Basically if you get the 9006 with 35w or 55w kit, it should be a bolt on for the stock U.S projectors.

I hope this helps.

[Fidhle007]

I cannot believe that a retarded thread with the question,Who makes HID's for the e30?, has made it to 4 pages.

Welcome to R3v.

[red325]

I cannot believe that a retarded thread with the question,Who makes HID's for the e30?, has made it to 4 pages.

[Asbradley21]

Blessed the, HIDionysus

[Fidhle007]

They can't. Couldn't be done five years ago when I got my first set and still can't be done today when I have HIDs in my fogs too. This is why I'm a golden god.

[Asbradley21]

Wow, HIDs in e30s have been commonplace for what, five years now?

What?!

I was told they can't be done!:nice:

[Fidhle007]

Wow, HIDs in e30s have been commonplace for what, five years now?

[Asbradley21]

You should see the rest of R3v.