Thinking of buying a 540i/6speed

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • bmwsone01
    replied
    Originally posted by e30s52
    Why? the e34 is a better built car then the e39.
    x3

    Leave a comment:


  • ILoveMPower
    replied
    Originally posted by SpecM
    I think the m60 Nickasil block was only used in the 3.0

    and BMW fixed them anyway
    Not true, the Nikasil issue was for all E34 V8's. A good amount of them were replaced with Alusil blocks (most under warranty) but the issue was mostly due to lower fuel grades of a few years back. Typically if the car still has good compression across all cylinders in this day and age you "shouldn't" have any issues with the Nikasil. Valley pan gasket is quite a bitch though (from what I hear). I ended up looking for an M30 car for daily drivability simply for it's ease of doing your own maintenance.

    Get your E34 answers HERE: http://forums.bimmerforums.com/forum...play.php?f=201

    Leave a comment:


  • SpecM
    replied
    I think the m60 Nickasil block was only used in the 3.0

    and BMW fixed them anyway

    Leave a comment:


  • Jean
    replied
    If you have AAA, you can purchase discounted carfax ;) That and PPI is well worth the purchase price of a car imho.

    Leave a comment:


  • e30s52
    replied
    Originally posted by jahnaboi
    Buying a 540i/6speed E34 1995. I'm assuming no one has carfax for me to leech off of? =/
    Aw good choice my friend. The e34's are great cars. Sorry I dont have a carfax for you.

    Leave a comment:


  • jahnaboi
    replied
    Buying a 540i/6speed E34 1995. I'm assuming no one has carfax for me to leech off of? =/

    Leave a comment:


  • Jean
    replied
    The valley cover job from what I read is not hard, just takes a long time to do as you have to drain coolant, remove the intake manifold and everything above/near it.

    This thread has some pictures - http://forums.bimmerforums.com/forum....php?t=1087940

    Suspension bushing jobs is straight forward, but labor intensive. you either remove the arms and have the bushings pressed out/in or replace the complete arms ($150 each vs. $40 each bushings) as the other side of the arm has a ball joint that most likely will need to be replaced later on.

    Starter job on a v8 car is a bitch as well, 400-600 job.

    Basically, have some money aside for repairs...

    Leave a comment:


  • blunttech
    replied
    Originally posted by Jean
    e39 v8 = get ready to do the following if they haven't been done already

    - coolant system with it's shitty radiator and valley cover gasket (pita job) $1100 job
    - suspension (thrust) bushings, or you'll go through new 18" tires every 6 months
    - driveshaft job is over a grand as well
    - cluster pixels going out
    - pretty much expensive everything lol.

    ive done all this except the driveshaft and some of it more than once on my wifes e39 540 sport. it seems to be stable now but fuck this car

    Leave a comment:


  • Alkasquawlik
    replied
    are they hard to DIY?

    Leave a comment:


  • Jean
    replied
    I love how they look, and the m62 or m5 cars with a manual are awesome! But maint. is a bitch.

    I am doing this (brothers car) next week, otherwise this is a $3-4k job at a local bmw shop.

    BMW quotes $1100 to do rotors and pads on these cars.



    Last edited by Jean; 09-07-2009, 05:51 PM.

    Leave a comment:


  • Alkasquawlik
    replied
    too bad the E39s have a such a great look to them

    Leave a comment:


  • e30s52
    replied
    Originally posted by Jean
    e39 v8 = get ready to do the following if they haven't been done already

    - coolant system with it's shitty radiator and valley cover gasket (pita job) $1100 job
    - suspension (thrust) bushings, or you'll go through new 18" tires every 6 months
    - driveshaft job is over a grand as well
    - cluster pixels going out
    - pretty much expensive everything lol.
    Originally posted by bimmer_E30
    i thought they took care of that Nikasil problem in 96?
    read the above quote

    Leave a comment:


  • bimmer_E30
    replied
    Originally posted by e30s52
    The m60's and m62's hand many of the same problems but with the e39 everything is made of plastic and breaks very easily. Also the cooling system in the e39 sucks.

    E34 m50 nv ftw it has never let me down even with 150k on it.
    i thought they took care of that Nikasil problem in 96?

    Leave a comment:


  • Jean
    replied
    e39 v8 = get ready to do the following if they haven't been done already

    - coolant system with it's shitty radiator and valley cover gasket (pita job) $1100 job
    - suspension (thrust) bushings, or you'll go through new 18" tires every 6 months
    - driveshaft job is over a grand as well
    - cluster pixels going out
    - pretty much expensive everything lol.

    Leave a comment:


  • e30s52
    replied
    Originally posted by bimmer_E30
    E34s 540i have some engine problems!!! but i think bmw made a recall and replaced Most of them.

    i would go for the E39 hands down.
    The m60's and m62's hand many of the same problems but with the e39 everything is made of plastic and breaks very easily. Also the cooling system in the e39 sucks.

    E34 m50 nv ftw it has never let me down even with 150k on it.

    Leave a comment:

Working...