Down at H2o right now. My 87 325 2.7i was running rough on the way down. If you would push down on the wiring harness it would shut off. Then you could pull up on it and it would run fine. Now it won't start at all. Going to rip the cover off the harness, my dad thinks one of the wires is spilt. Anyone have any other suggestions??? HELP???
-
-
It cranks over it just won't start. -
that sounds right. have fun finding the wire. what part of the harness is it at?seien Sie größer, als Sie erscheinen
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
Right under the intake.Comment
-
maybe the injector harness is all corroded up?? unplug it and see if you can get a look in there. they collect water and get fucked upComment
-
after that ty wiggling each cluster of wires in there, then cranking the car over to see if it starts after each attempt. that will at least help you narrow it down to find the angry wireseien Sie größer, als Sie erscheinen
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
It ended up being the fuel pump relay...IDKComment
-
I had that problem before.1985 325e 2.8 Turbo VEMSComment
Comment