reverse hitting console after new bushings

[tjmonsen5]

I rebuilt my 87 325is with a Z3 1.9 shifter and all new bushings, as well as Delrin bushings for the shift arm carrier (the one on top of the trans). My shifter does not hit the center console.

I rebuilt my buddies 85 eta, Z3 1.9, with the sheet metal console, and all new bushings, and it hits the console. I blame it on the stupid design of the sheet metal bushings. Those things allow way too much play. I think it would be best without a bushing at all, just bolted right to the trans.

[iwantspeed]

It does in my car. Let us know if that fixes it, I am tired of people putting my car into first when I tell them far left until it feels like it broke something.

mine hits, its annoying I will update this if I find a solution

Mine hits also. And I need new bushings

mine hits after new bushings:hitler:
but it does feel way better with a short shifter and new shift knob

What are signs of bad bushings, doesn't seem like anything is wrong with mine.

when downshifting and taking a turn, and you go from 3rd to 2nd and you can't find second!
that was a combination of shitty trans mounts and sloppy vagina shifter

haha when the shifter is loosey goosey and you start missing shifts cause the bushings are so bad...just did mine a month or two ago..big big improvement...and mine also still hits the console.guess thats just the nature of the beast old and you cant do anything about it...the rest of the play still left in the shifter is all internal transmission and cant be fixed.

yes sir and it will be fixed

Mine hits bad. OP, your grammer is mostly undeciperable.

mine hits it and moves the console, I apologize for the shitty grammer I edited the original post.

[e34john]

Ok then, my bushings are perfect, the PO did a bunch of stuff to the car right before I got it and I hardly ever drive my car. Shifter still hits though.

[Jean]

I have no such problem with mine. I've used the 1.9 shifter with my m10 and all new shifter hardware with the metal console and currently using the same shifter with new hardware and the late model g260 shift console. Does not hit the console in reverse.

[txtorquemade]

Mine hits bad. OP, your grammer is mostly undeciperable.

[lola26]

haha when the shifter is loosey goosey and you start missing shifts cause the bushings are so bad...just did mine a month or two ago..big big improvement...and mine also still hits the console.guess thats just the nature of the beast old and you cant do anything about it...the rest of the play still left in the shifter is all internal transmission and cant be fixed.

[e34john]

What are signs of bad bushings, doesn't seem like anything is wrong with mine.

[Conki]

Mine hits also. And I need new bushings

[noE30]

Mine hits also. And I need new bushings

[e34john]

It does in my car. Let us know if that fixes it, I am tired of people putting my car into first when I tell them far left until it feels like it broke something.

[iwantspeed]

Hey guys I was just wondering how many of you have a shifter that hits the center console when going into reverse?

I bought all new shifter bushings except the bushing connected to the rear of carrier.

I replace the front console bushing with a new oem rubber bushing, not an aftermarket piece

I bought a Z3 1.9 shift lever, new shifter bushings and a new trans mounts.

I just assumed after all new bushings it would stop hitting the console.

Some guys have mentioned, that they purchased aftermarket delrin carrier bushings and that has fixed the problem.

There is no way an e30 new from the dealer, when shifted into reverse would hit the center console.

Why after replacing all of the components there is still contact with the center console when shifted into reverse?

discuss