should i buy these rims

[Stephen]

Whats the specs? and my wheels do not sit out too far.


My guess is they are the exact same specs as mine, and ive already dealt with that headache

[decay]

4x114.3 will not need to be welded, just redrilled with a set of 4x100 holes. you can get multi-lug wheels with both patterns.

whether to get them depends heavily on what the offset is, IMO.

[newman]

Spacers and adapters are 2 different animals, really... It'd probably be easier to redrill your hubs and get a hubcentric spacer.

[White325is]

fuck you and your shitty knockoff wheels.

Cam: adapters are kinda wack. Stephen is running them and his wheels poke out way too far. For $250 getting them filled and drilled would probably be way worth it for legit borbets.

They are FWD rims so the ETs are more then likely way off for just a drill and mounts. So he would need a spacer for sure.
But your saying a 25mm adapter is worse then a 25mm spacer?
VW crew have been rolling on spacers for years and years now. I dont think I have ever read any where once of someone having a serious issue with them unless installed wrong.

[Danny]

Get them and then get them redrilled?

[MR 325]

fuck you and your shitty knockoff wheels.

This is completely unnecessary.

Have you had first hand experience with his products? No.

[accident]

For another $450.00 you can buy a brand new set of esm 009 borbet reps in 16x7.5 and 16x9 BRAND NEW no adapters or drilling and filling needed:)

fuck you and your shitty knockoff wheels.

Cam: adapters are kinda wack. Stephen is running them and his wheels poke out way too far. For $250 getting them filled and drilled would probably be way worth it for legit borbets.

[widebodye30]

For another $450.00 you can buy a brand new set of esm 009 borbet reps in 16x7.5 and 16x9 BRAND NEW no adapters or drilling and filling needed:)

[Strelok]

I've heard nothing but bad about adapters. Don't half ass it.

[KillaCam]

well i was thinking of getting adapters for it

[HarryPotter]

That's up to you I would say. If you have some type of use for them go for it.

[MR 325]

Call and get estimates to have them welded and redrilled.

That should help you decide.

[KillaCam]

they are lagit borbet type a

[KillaCam]

they are 4x114.5 for accord and nissan but they are only 250 bux

i know its small but thats all there was



here is another should I buy they are for 35 bux no rails and they are tenzo r's this one has minor rips but the other is missing a whole bunch of fabric



Let me know