should i buy these rims

[KillaCam]

they are 4x114.5 for accord and nissan but they are only 250 bux

i know its small but thats all there was



here is another should I buy they are for 35 bux no rails and they are tenzo r's this one has minor rips but the other is missing a whole bunch of fabric



Let me know

[KillaCam]

they are lagit borbet type a

[MR 325]

Call and get estimates to have them welded and redrilled.

That should help you decide.

[HarryPotter]

That's up to you I would say. If you have some type of use for them go for it.

[KillaCam]

well i was thinking of getting adapters for it

[Strelok]

I've heard nothing but bad about adapters. Don't half ass it.

[widebodye30]

For another $450.00 you can buy a brand new set of esm 009 borbet reps in 16x7.5 and 16x9 BRAND NEW no adapters or drilling and filling needed:)

[accident]

For another $450.00 you can buy a brand new set of esm 009 borbet reps in 16x7.5 and 16x9 BRAND NEW no adapters or drilling and filling needed:)

fuck you and your shitty knockoff wheels.

Cam: adapters are kinda wack. Stephen is running them and his wheels poke out way too far. For $250 getting them filled and drilled would probably be way worth it for legit borbets.

[MR 325]

fuck you and your shitty knockoff wheels.

This is completely unnecessary.

Have you had first hand experience with his products? No.

[Danny]

Get them and then get them redrilled?

[White325is]

fuck you and your shitty knockoff wheels.

Cam: adapters are kinda wack. Stephen is running them and his wheels poke out way too far. For $250 getting them filled and drilled would probably be way worth it for legit borbets.

They are FWD rims so the ETs are more then likely way off for just a drill and mounts. So he would need a spacer for sure.
But your saying a 25mm adapter is worse then a 25mm spacer?
VW crew have been rolling on spacers for years and years now. I dont think I have ever read any where once of someone having a serious issue with them unless installed wrong.

[newman]

Spacers and adapters are 2 different animals, really... It'd probably be easier to redrill your hubs and get a hubcentric spacer.

[decay]

4x114.3 will not need to be welded, just redrilled with a set of 4x100 holes. you can get multi-lug wheels with both patterns.

whether to get them depends heavily on what the offset is, IMO.

[Stephen]

Whats the specs? and my wheels do not sit out too far.


My guess is they are the exact same specs as mine, and ive already dealt with that headache

[widebodye30]

fuck you and your shitty knockoff wheels.

::crazy::crazy::crazy:

This is completely unnecessary.

Have you had first hand experience with his products? No.

Thanks Matt!

Either way Im just trying to help.... for a couple hundred extra you can get a wheel that will be a DIRECT fit for your car and they will be brand new with 4" polished lips on the back and 3" on the fronts with the right offsets for the e30.

For the few hundred extra personally I think the best thing to do is to get ones that are ready to go because in the end you will end up spending almost as much to make em fit RIGHT.

Thanks,