I need to remove my passenger side sprayer, I can move it around a bit, and I pulled back the hood lining, (fucking stripped plastic screws :|) but I don't want to just rip it out and break it or anything. Does anyone know how to get these little fuckers out?
-
"Its preparations are concealed, not published. Its mistakes are buried not headlined. Its dissenters are silenced, not praised. No expenditure is questioned, no rumor is printed, no secret is revealed."
John F. Kennedy
-
just some needle nose pliers to push in the little tabs on either side that hold em in. I take mine out periodically to soak them and clean em up cause they get jammed full of wax from how often I wax my car. good luck. your on the right track with removing the hood liner.sigpic
1991 325iC w/ 75k Original Miles, Brillantrot, 5-speed, 16" BBS RX's, Black Leather Sport Heated Seats, LSD, and Diving Boards for life!!!:D -
there expanding rivet screw things. there probably .30 cents newComment
-
Nvm. Got em out. Fixed the clogged bs, got me some nice new windshield sprayin dog gon deals naw pa.
Thanks M5 I pretty much just did that. Used a wire brush to clean them out, but not they way you're probably thinking. I just used a needle to jab in there and clean em out. Shootin real nice now. Like a young man. They were probably comparable to blunt as in old and dribbly.
"Its preparations are concealed, not published. Its mistakes are buried not headlined. Its dissenters are silenced, not praised. No expenditure is questioned, no rumor is printed, no secret is revealed."
John F. Kennedy
Comment
Comment