Whats A Good...

[pogiboy9]

Whats a good Cold air Intake for a '84 325e and are there any available body kits ? if no about the intakes i can just make one (hybrid) and the kits maybe just compress the bumpers and get a sideskirt w/ minor rear kit

[Jand3rson]

There's not really a true cold air intake for the M20. You can get a kit that replaces the stock airbox with a cone filter, but unless you build a heatdhield around the filter, you're just going to be pulling in hot air from the motor, and wind up with less performance that with the stock airbox. My suggestion is ditch the intake idea and get a chip. Chips in etas make a world of difference.

As far as body kits go, there are quite a bit available for the E30, but a lot of the good ones are going to be from overseas. You just need to do some searching around. Good ones can be had in the US. Tucking the stock aluminum bumpers actually does look really good though, a lot of members here including myself have done it. I did a write up on how to do it about a year ago. If you would like it, email me and I will send it to you.

[pogiboy9]

Ok sure ill get a chip if u find me one for my E30 '84 325e

[m42technic]

https://www.turnermotorsport.com

[pogiboy9]

For my '84 ?

[KenC]

I did a write up on how to do it about a year ago. If you would like it, email me and I will send it to you.

It's on the mainpage in the tech section.

[Jand3rson]

I did a write up on how to do it about a year ago. If you would like it, email me and I will send it to you.

It's on the mainpage in the tech section.

Yeah, I know it is now. It's also on Fred Kim's site.

http://www.strictlyeta.net/technical/bumpertuck.html

[Werksmini]

Ok sure ill get a chip if u find me one for my E30 '84 325e

Wouldnt want to do too much.