Those who replaced airbag wheel with standard wheel

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • reelizmpro
    replied
    Man, that's perfect. I was all over home depot looking for something just like that. Just stacked up 4 thick washers at $.18 a piece. What do they call that at Harbor Freight?

    Leave a comment:


  • CincinnatiKid
    replied
    I used one of these I found at harbor freight.

    Leave a comment:


  • reelizmpro
    replied
    If your horn doesn't work then it's probably too far out to make proper contact. I think it's better to just place the washers on the outside of the steering wheel right behind the nut instead of behind the wheel. That way at least everything works right (horn and turn signal stop). Then just bend the stalks a bit for more hand clearance.

    Leave a comment:


  • Tree18is
    replied
    all of this is true. Let me know if your horn works, cus mine doesn't : (

    Leave a comment:


  • woodisgood
    replied
    Originally posted by jeff_b
    nut dick nut. in that order
    Now that shits funny.....

    Leave a comment:


  • jeff_b
    replied
    nut dick nut. in that order

    Leave a comment:


  • txtorquemade
    replied
    maybe its all the crack your smokin?...

    LOL.. just kiddin man

    Leave a comment:


  • reelizmpro
    replied
    Originally posted by NitroRustlerDriver
    Do you mean, like the left side of the wheel is farther towards the front of the car and the right side towards the rear?
    Yeah, kinda seems like it. Maybe I'm imagining it. I'll have to drive the car a bit more.

    Leave a comment:


  • AndrewBird
    replied
    Do you mean, like the left side of the wheel is farther towards the front of the car and the right side towards the rear?

    Leave a comment:


  • reelizmpro
    replied
    Yeah, another one of those spacers would do it as well but I ended up using extra thick washers in addition to the nut to take up space so I can torque the wheel down. What i'm curious about is how the wheel is seemingly angled to the left. I searched and found some E46 owners who have noticed the same thing with their cars.

    Leave a comment:


  • Matt-B
    replied
    screw driver from behind, and a hook set ftw!

    Leave a comment:


  • ethree
    replied
    Originally posted by der affe
    you could do that too, but around here at most of the PNP's the keys are gone so the steering wheel locks are stuck so you can't get the wheel off. i have had to leave several nice MT-1 wheels behind because of this.
    Next time try your key, It will get one out of three or so columns unlocked.

    Leave a comment:


  • tomkate28
    replied
    Havent noticed any gap,ill check tomorrow. It functions and feels perfect.

    Leave a comment:


  • Matt-B
    replied
    and you have an annoying gap between column an wheel right?

    Leave a comment:


  • tomkate28
    replied
    I did spacer,spacer,wheel,washer,nut and it functions perfectly.

    Leave a comment:

Working...