Best Home-made rust remover?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • SUICIDE109
    replied
    Grinder and wire wheel..... not homemade but it works

    Leave a comment:


  • TwoJ's
    replied
    Or mix bleach and vinegar...

    Leave a comment:


  • nmlss2006
    replied
    Any acid will work. Vinegar (the kind which is actually acetic acid in solution ~4%) will work fine over a 12h period and is inexpensive and safe. Just scrub the part under the surface of the liquid prior to extraction - while wearing a decent mask, some of the compounds may be nastyish.

    Leave a comment:


  • Mossman
    replied
    I mixed up 48% Acetone 52% atf and it seems to work well so far, although I haven't really had a terrible job to try it on yet. I have some IX strut housings with mangled gland nuts that are soaking in the aforementioned concoction now, might try to finish the job tonight, we'll see how it does. If it frees those up I will be a believer.

    Leave a comment:


  • willybustaE30
    replied
    Originally posted by der affe
    pool acid! works great for eating rust, esp off of old rusty nuts and bolts.
    muriatic acid . put it in a kiddie pool and dip those parts away.
    dont breathe too hard. its caustic. lol

    Leave a comment:


  • bear
    replied
    that electrolysis option looks very fun, I feel some shenanigans comin on for the weekend

    Leave a comment:


  • TwoJ's
    replied
    Electrolysis is the best way to do it in my opinion.

    Leave a comment:


  • noid
    replied
    I know my local dealer and probably all other dealers use "Wurth" the company for their sprays.

    My home-made solution in terms of bolts and thing of that nature are to take an angle grinder, grind down the middle and chisel off the head, then its usually fairly easy to screw up the rest without the pressure of the head.

    Leave a comment:


  • bear
    replied
    pipe wrenches and a hammer

    Leave a comment:


  • der affe
    replied
    pool acid! works great for eating rust, esp off of old rusty nuts and bolts.

    Leave a comment:


  • Farbin Kaiber
    replied
    Naval Jelly. But that's more for exterior surfaces.

    Leave a comment:


  • ortholithiation
    replied
    Originally posted by hellabad
    oxalic acid
    +1

    Don't bother using organic solvents to remove rust, its insoluble for the most part. Poly ethereals like ATF brake fluids will be a bit better, but an aqueous solution of oxalic acid or something that can reduce then carry away is much better. Metal oxides = insoluble.

    Leave a comment:


  • Sailor37
    replied
    Elbow grease

    Leave a comment:


  • z31maniac
    replied
    Originally posted by nwvb bmw
    Bleach and ammonia...

    Leave a comment:


  • Hellabad
    replied
    oxalic acid

    Leave a comment:

Working...