AHHHH! suspension help

[mamzak]

So, I'm installing a new suspension and I put the strut assembly together but noticed that the springs are loose and have the ability to move around.

Any suggestions. Am I missing something?

[slo325i]

First off, assuming you have an e30 325is, what springs/shocks/coils are you installing?? Are you installing camber plates as well??

Also are the springs loose when the car is on the ground or up in the air??

[ak-]

Depending what springs you have, it could be normal.

Example: H&R Race hang loose if your car is in the air. Eibach pro-kit, you need a spring compressor.

[Stephen]

If you theyre not loose, lower your car more

[mamzak]

They're IE3's, with billy sports.

So they should be able to move around in there when the car is on jack stands, and there's no pressure on the strut assy?

[MikeK]

yes, once you set your car on the ground, the springs will settle. or is it suttle.

[Van Westervelt]

They will settle in, and come to a resting point. This is normal. I would suggest just lining the spring ends with the strut perch and upper plate before lowering it back down though.

[mamzak]

They will settle in, and come to a resting point. This is normal. I would suggest just lining the spring ends with the strut perch and upper plate before lowering it back down though.

Yep! Did that, and she looks gorgeous!! SUCH a big upgrade from stock, holy shit! Love it.