I know I'm pretty new here, but i was hoping some of you could help me out. I'm in school for drafting and design and I have an idea for my final design project of the semester. I'm planning of doing a complete 3D model of a M20B25. I'm going to draw a complete block, crank, rods etc. head, valves cam. And i want to add an ITB setup for shits and giggles. But my problem is, my engine is in my car, and I can't really take it apart to get measurements for this drawing. So i was hoping if some of you that are in the process of rebuild your motors could get some measurements for me.
What I need:
The over all dimensions of the block LxWxH
The spacing of the cylinders.
the spacing and size of water jackets
The dimensions of the head.
Diameter of the flywheel.
Size of the crank journals
Dimensions of the rods pistons and wrist pins.
Length and diameter of cam and lobe spacing.
Thats all I can think of right now. I should be able to get the rest from my engine and other parts that i have right now. Thanks in advance! and if anyone can help me out, and the happen to be in tucson or coming to visit, I will be you many beers!
What I need:
The over all dimensions of the block LxWxH
The spacing of the cylinders.
the spacing and size of water jackets
The dimensions of the head.
Diameter of the flywheel.
Size of the crank journals
Dimensions of the rods pistons and wrist pins.
Length and diameter of cam and lobe spacing.
Thats all I can think of right now. I should be able to get the rest from my engine and other parts that i have right now. Thanks in advance! and if anyone can help me out, and the happen to be in tucson or coming to visit, I will be you many beers!
Comment