Mtech II question
Collapse
X
-
Wasn't there a guy who ran the vert parts on his coupe without any problems? We all assumed they were different because of the part numbers and they probably are but the difference could be so subtle that it's not even an issue. I can see the skirts being different but the door pods should be the same given you have a facelifted car.
Yeah, it was this thread 3rd page. http://www.r3vlimited.com/board/show...t=mtech&page=3
This is what he said.
"And yes, a lot of comments on this board said that the Cabby side skirts wouldn't work, but I bit the bullet anyways and pressed on. Turns out the top line of Coupe M Tech side skirt clips WILL work on the Cabby skirt, but it is the bottom that you have to come up with a way to attach to the bottom lip of the rocker panel. I actually had chatted with a guy on E30Zone recently, and he had somehow attached Coupe skirts on his Cab, and that sold me that it would be able to fit vice versa, and so on."Leave a comment:
-
Thanks for the heads up on that site. They're cheaper than Tischer.
Seeing this huge price difference, it makes more sense for me to just buy two new coupe pieces and sell the vert piece I have.
I know it's been done before, but I am just curious about what the subtle differences are.Wasn't there a guy who ran the vert parts on his coupe without any problems? We all assumed they were different because of the part numbers and they probably are but the difference could be so subtle that it's not even an issue. I can see the skirts being different but the door pods should be the same given you have a facelifted car.Leave a comment:
-
Wasn't there a guy who ran the vert parts on his coupe without any problems? We all assumed they were different because of the part numbers and they probably are but the difference could be so subtle that it's not even an issue. I can see the skirts being different but the door pods should be the same given you have a facelifted car.Leave a comment:
-
Yeah, I noticed the price difference too. On bmwmercedesparts.com the coupe rear panel is going for around $70 while the convertible panel is around $120.
Did you happen to see the part number of your panels?
You mentioned that you'd be willing to trade your coupe panels for my vert one(s). Do you have the whole coupe kit? If so, want to trade sideskirts? Feel free to PM/email/text me with what you're planning with your kit.
I looked at my coupe panels and this is what's printed on them, there is an image of a roundel followed by this number:
Right = 22398720RPBR
Left = 22398710LPBR
As for the coupe side skirts I traded mine with SFGadgetguy's convertible skirts probably around 2 years ago. He installed them on an alpine white early model, which he put the full m-tech II kit on. He sold the car to a guy here in the Southbay I believe.
I looked up the price of new coupe m-tech II skirts and they are not too bad, around $350-ish for the set. Hopefully they're still available.
I also recall a thread on e30zone.net where they were wondering the difference between coupe and convertible rear panels. I think the difference is possibly in length or where the panel meets the rear arch. From what I recall it was a small difference but I can't remember any specific details.Leave a comment:
-
Thanks for the pics guys. Another difference I just found is the price. The convertible panel costs over 50% more than the coupe part.
I don't think that's it, as the front fender pieces and the door pieces are the same between coupe/vert. It's only the quarter panel piece that has different part numbers. If the vert kit was made wider, you would expect the fender/door pieces would be different as well.
Did you happen to see the part number of your panels?
You mentioned that you'd be willing to trade your coupe panels for my vert one(s). Do you have the whole coupe kit? If so, want to trade sideskirts? Feel free to PM/email/text me with what you're planning with your kit.Leave a comment:
-
here are some pics. if anything i would think the bottom on the panels are wider to accommodate the wider rocker panel.





Leave a comment:
-
If my kit had come with both panels, then I probably would trade you, just so I have the "correct" pieces. Since I am going to be ordering a new piece, I'll just hang on to my stuff.
I wouldn't mind seeing your parts just to compare to the vert one I have, but I don't want to waste your time just looking at your pieces.
Thanks, but that won't be needed. I have the convertible panel for one side, so I know what it looks like. I was just curious about the difference between that and the coupe version.
I'm just going to order the convertible version so that if there are any differences, at least it will match the other side that I already have.Leave a comment:
-
erik, i can drop by and show you my car if u want to inspect the panels. just pm me.Leave a comment:
-
I have coupe m-tech II rear panels and will trade for convertible ones, I'm pretty sure they're more or less the same thoughLeave a comment:
-
-

Leave a comment: