Whats that ONE most annoying rattle...
Collapse
X
-
My drivers seatbelt squeaks/rattles/whatever the hell you call the noise it's making all the time, every time my body changes position in the seat.Leave a comment:
-
the cupholder on my husco arm rest is cracked and rattle like a mofucka. i just put a arizona ice tea in it everyday to fix it.Leave a comment:
-
chirping could be a belt, belt tensioner, brake pad wear sensor, poly subframe bushings...omg so many ghosty creaks in my car I have no idea.
One in my drivers door. Sounds like my window linkage is knocking on the door.
Everything is tight and in place.
A cricket like chirp all the time.
Have no idea where it's coming from.
A low speed chirping/ticking on the outside of the car under 20mph.
But only when accelerating. Sounds like everyone 1 wheel rotation it does it.
Dash over every bump.Leave a comment:
-
One right above the passenger side sunvisor, it's like 3 layers of sheet metal there including the roof skin. SUCKAGE.Leave a comment:
-
My shift carrier or linkage rattles at high rpms and its annoying as fuck.
Also when I drive in reverse theres a clunking sound when the car starts moving, either somethings loose or probably the exhaust hitting something.
Both have not been fixed yet so we'll seeLeave a comment:
-
-
Shifter carrier rattles in 5th gear and the heat shield on the cat rattles at various speeds.Leave a comment:
-
I put the washer on incorrectly on my car's rear shocks. OMG was the rattling annoying.Leave a comment:
-
My Getrag 260 is one noisy piece
Rattles like crazy in neutral
Any fixes?
Sent from my Ally using TapatalkLeave a comment:
-
My sunroof rattles when it is closed all the way ONLY. I usually just leave it vented so it does not rattle. Someday I will take off the headlined cover and see what it is.
The driveshaft was making noise...........new drive shaft and CSB.
The rear axles were noisy ...........I bought a good set of used ones and replaced the boots, cleaned out the old grease, inspected them, rebooted them with new EMPI boots from BLUNT, and repacked them with mobil-1 synthetic grease.
Less noise now, but with solid trans/motor and an M3 diff bushing, I can still hear the trans and rear end noise. That is just part of the deal I guess.Leave a comment:

Leave a comment: