Worth Repairing?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hafa_adai
    Noobie
    • Apr 2011
    • 19

    #1

    Worth Repairing?

    Looking to get some opinions on this car. Pics below. Is it worth the repair involved or should I sell or part it out?

    The car was hit while parked. As you can see in the pics the damage included the control arm, headlight area, bumper, driver door. In addition the inner fender area was pushed in so I doubt a fender would line up properly. I did replace the driver side control arm and the car is drivable in it's current state.

    I took it to a few body shops to get an estimate and most didn't really want to touch it. One shop said they would be willing to literally bang out the inner fender area enough that so they could put a fender on it for about $300.

    1990 325i AT







    1990 325i Delphin Coupe
    Project Thread
  • Big Willy
    E30 Addict
    • Jun 2009
    • 552

    #2
    I'd try to bang out that myself with a hammer, it would still drive and look fine. The frame looks tweaked though, which explains why not many repair shops wanted to even touch it, requires too much time to make it perfect for the job to be cost effective for them.
    instagram

    Comment

    • 5Toes
      Banned
      • May 2010
      • 9836

      #3
      Swap it all over to a nice car. Or part it

      Comment

      • merrrr
        Wrencher
        • Jun 2010
        • 296

        #4
        that thing will never drive the same again. shes toast

        Comment

        • Pantless Spency
          It's McRib time!!!
          • Feb 2011
          • 7284

          #5
          tis a shame :/ i'm in the bay too if you decide to part it out i want your head!!! i think mine may have a crack/leak somewhere :/

          Comment

          • hafa_adai
            Noobie
            • Apr 2011
            • 19

            #6
            Yeah, I was leaning that way. Though I may try to sell it whole.
            1990 325i Delphin Coupe
            Project Thread

            Comment

            • hafa_adai
              Noobie
              • Apr 2011
              • 19

              #7
              I decided to put a fender on and see how far off everything was. Now I think I may try to push it back and save this car.


              1990 325i Delphin Coupe
              Project Thread

              Comment

              • JT325is
                E30 Fanatic
                • Oct 2009
                • 1242

                #8
                save it, ive seen worse.
                sigpic

                Comment

                • 325ix
                  R3V OG
                  • Aug 2009
                  • 7783

                  #9
                  At least try and save it. It doesn't look too bad. Tell us how it goes.

                  Comment

                  • e30Hungry
                    Wrencher
                    • Mar 2011
                    • 250

                    #10
                    its worth trying to fix, but if you decide to part out ill buy your dash. ( if it has no cracks ) :up:


                    1987 - 325e Project / DD

                    Comment

                    • BrettsE30
                      Grease Monkey
                      • Feb 2011
                      • 306

                      #11
                      It is fixable for sure. It's just not cost effective. Anythings fixable of you've got time and money. Or beat it back and make it a racer or somethin.
                      I need your obd1 parts! Harness intake ecu etc.

                      E30 Your Daily Money Pit

                      Comment

                      • 416stroker
                        R3VLimited
                        • May 2008
                        • 2448

                        #12
                        Id be worried about the strut tower being bent. had one hit verry simular and it moved the tower over a few inches.
                        84 318I Delphin RIP
                        87 325IS delphin 24v Sold
                        89 325 Alpineweiss

                        Comment

                        • hafa_adai
                          Noobie
                          • Apr 2011
                          • 19

                          #13
                          A bit of progress.


                          1990 325i Delphin Coupe
                          Project Thread

                          Comment

                          • hafa_adai
                            Noobie
                            • Apr 2011
                            • 19

                            #14
                            Test fitting everything together. With a little more tweaking the car will live on.

                            1990 325i Delphin Coupe
                            Project Thread

                            Comment

                            • Bimmerista
                              R3V Elite
                              • Nov 2005
                              • 5425

                              #15
                              Good man

                              Comment

                              Working...