AHHHH Turbo oil line! Please help me find one!

[MonkeyMadness]

I feel like ever time I try to buy or build one I keep getting the wrong shit...
Got a setup from a friend nothing matched and ended up giving it all back
ugh..

Bought a set up from JGS everything look awesome, pulled the oil pressure
thingy and the threads are totaly wrong...

now fucking done with this crap.. the only thing holding me up is this fuqing setup to thread in to the block..

Can't find what I need, willing to paypal now for a kit.. :hitler:

looked through the list of stores and sponcers in the retail section
and got nothing.. please help me before I scrap the hole thing.....

[IxTech]

so you need an oil feed line? i used my stock oil filter/oil cooler thing with an oil sandwich that has npt ports for feed and gauge senders. works good so far. just make sure you get the right oil filter to fit your sandwich adapter threads. mine were different and i had to get a filter from a 944

edit: this is exactly what i have. http://www.cxracing.com/mm5/merchant...gory_Code=OLSW

[morerevsm3]

you need a 14 x 1.5mm tee with a 1/8 NPT port

[MonkeyMadness]

Thanks, I ended up getting a 1/8 x 27 Pipe tap and drilled and tapped the oil filter
housing bolt head and then used the oil feed line I got from JGS. It turned out pretty nice.

thanks :up: