Are these 14.5# injectors?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • hotballs
    replied
    Thanks, so I did a little sleuthing. The Bosch part number for m20 14.5 injectors is 0280150715.

    According to this table here.... http://www.injectorcleaning.co.uk/flow.htm ... it makes sense because that part number comes up having a flow rate of 155cc/min = 14.74lbs/hr @ 15.9 Ohm.

    To get cc/min multiply lbs/hr by 10.515.

    This should be in the tech section.

    Leave a comment:


  • gtdragon980
    replied
    well IIRC, when i recieved them, i think they were grey. But i did call and verify with the reps that it is 14.5# and it is for our car.
    Originally posted by hotballs
    And they were light blue? or at least verified 14.5 lbs/hr?

    Thanks

    Leave a comment:


  • TimR
    replied
    Check with this guy he may some sets sitting arround http://search.yahoo.com/r/_ylt=A0oG7...orservice.com/

    Leave a comment:


  • nando
    replied
    Originally posted by devon.818
    ireland engineering sells new injectors.

    you can get 17# ones that are NEW for 38 shipped

    http://store.nexternal.com/ireland/f...lbhr-p328.aspx
    that's $38 each, and they're backordered.

    Leave a comment:


  • hotballs
    replied
    Originally posted by gtdragon980
    set of 6 rebuilt for 80 bucks, i bought mine from here! great quality!
    http://www.fuelinjectorconnection.co...&productId=107
    And they were light blue? or at least verified 14.5 lbs/hr?

    Thanks

    Leave a comment:


  • hotballs
    replied
    Don't worry about my profile, that is old. I knows what I'ms looking for.

    Leave a comment:


  • TimR
    replied
    http://search.yahoo.com/r/_ylt=A0oG7...%2520Table.htm Stan Weiss fuel injector tables

    Leave a comment:


  • gtdragon980
    replied
    set of 6 rebuilt for 80 bucks, i bought mine from here! great quality!
    Fuel Injector Connection is the leader in high performance fuel injectors from top manufacturers including Bosch, Siemens, and Lucas.

    Leave a comment:


  • TimR
    replied
    If there for the 84 ETA listed in your profile they use a different injector than the I motor, i've seen posts saying other later injectors will work but its something to do with the impedence, ones high, ones low but i've never tried it. His listing might be wrong, ETA injector 0280150126
    Last edited by TimR; 06-15-2011, 10:19 AM.

    Leave a comment:


  • hotballs
    replied
    38 * 6 = $228

    I'm ok with cleaned with flow test sheet. I have a set of 17s laying around but would cost $94 to clean them. Right now I'm just looking for some 14.5s already cleaned.

    Leave a comment:


  • devon.818
    replied
    ireland engineering sells new injectors.

    you can get 17# ones that are NEW for 38 shipped

    http://store.nexternal.com/ireland/f...lbhr-p328.aspx

    Leave a comment:


  • hotballs
    started a topic Are these 14.5# injectors?

    Are these 14.5# injectors?

    http://cgi.ebay.com/ebaymotors/BMW-3...ht_7801wt_1165

    The only ones I've ever seen are light blue. Looking for cleaned 14.5s.
Working...