my ignition. whats all those wires for anyway? only takes 3 to start the car
Stuff that you purposely half-assed/ghetto
Collapse
X
-
-
on my verts speaker covers i took wire cutters to the plastic circle and dremeld it down to fit speakers in. Is not noticeable at all unless you really care to look. Fuel hose as shifter bushing. Euro clock wires but is there really a correct way?I need your obd1 parts! Harness intake ecu etc.
E30 Your Daily Money PitComment
-
-
Zip tie oil dipstick tube in place on 24v swap because I don't have fab skills to make a bracket.
Made a bracket out of a long screw to hold the power steering pump out away from the stock mount to fit in the s50.Originally posted by z31maniacI just hate everyone.
No need for discretion.Comment
-
ok ima post for ill4noreason because i helped with some of his ghetto shit.
-we couldn't figure out the parking brake on his vert, so we removed it.
-didn't buy koni's with his GC kit, his shocks blew and his tires ate the tire wells.
-instead of unscrewing the dust shield when his rear brake line was cut, he took sheet metal pliers and cut the dust shield off...yeah that was fun
-doing the plastic bumper swap we couldn't get the rear DB off, so we tied it to my first e30 and tried to tug-o-war it into subbmission, the roap broke
-he didn't "feel" like installing his interior right. so the seatbelts are just for show
-before we put the m50 in it we put a fresh m20 in, well we were lazy and used furniture bolts and one motor mount to hoist it into place.
there is SOOO much more but thats all i remember. good times lolComment
-
haha yea my shit has or had some ghetto shit but you gotta make do with what you have sometimes... as long as you don't plan on keeping it that way its all good.My Multi car part out. Need a part? Pm me...
http://www.r3vlimited.com/board/showthread.php?t=193051
Need 24v swap parts? How about a LSD? Plastic Bumpers? Or anything else click here...
http://www.r3vlimited.com/board/showthread.php?t=215044
Have you done business with me? If so leave me feedback here...
http://www.r3vlimited.com/board/showthread.php?t=188307
Comment
-
no o2 sensor connected because i swapped to motronic 1.3 and my 3 wire no longer plugs in. too lazy/cheap to buy a new one. its also too short due to the new headers. dont feel like extending either.
Two words:
zip. ties.-AlexComment
-
-
I never want to buy an E30 from any of you.....Comment
-
Ziptied my oil cooler on, it fell off in the snow. 250 tow and a new m20 later I mounted it right. My exhaust is hung by two hoseclamps. Other then that, my car is beautiful :)
Comment







Comment