Ryan Stewart article

[BIG$COTT]

hey... could somebody post a working link to the ryan stewart lighting article? im upgrading my '85 eta to US ellips and have run into the 3 wire vs. 2 wire issue. from reading other posts, it appears that this article should clear up my problems. the "archercc" address wasn't working for me, so anything would be appreciated. thanks guys.


Scott

[KenC]

He took his site down.

[BIG$COTT]

so is there no way of getting an answer? c'mon r3ver's help a guy out!!! you guys are E30 geniuses!!! surely there is someone out there that can describe exactly what to do.

[Rob]

have you checked the lighting forum? Maybe even performed a search or two?

[BIG$COTT]

yeah, they all seem to be for euro ellips. i want help in fitting my 9006/9005 plugs onto my old wiring

[Jordan]

you have to connect like 4 wires.

figure it out.

[BIG$COTT]

jordan, jordan, jordan...

dont you understand that im nearly retarded?

btw, what do these 4 wires look like?

[KenC]

Crimp some male spades onto the end of your headlights and plug them into the stock plugs.

[BIG$COTT]

ok... now can somebody tell me where the high and low relays are located in my '85 eta? (in relation to the fusebox)

[Jordan]

somebody tell me where the high and low relays are located in my '85 eta? (in relation to the fusebox)

Above the fuse box, under the cover.

[Schniddy]

his euro bumper swap article would be nice to see too

[BIG$COTT]

well how about this... are the relay locations universal for all e30's?

[Ryan Stewart]

I shot you back an email. If you have any more questions feel free to email again.

My site is currently gone, I was hosting from my PC but I moved to a place with DSL instead of cable and I dont have as much spare bandwidth to host with and I dont feel like trying to hack a new router for a static IP. If someone wants to host it for me I can send them the HTML this weekend.

[KenC]

I shot you back an email. If you have any more questions feel free to email again.

My site is currently gone, I was hosting from my PC but I moved to a place with DSL instead of cable and I dont have as much spare bandwidth to host with and I dont feel like trying to hack a new router for a static IP. If someone wants to host it for me I can send them the HTML this weekend.

You should have Jordan add all of your articles to this site along with his.

[BIG$COTT]

ok... new problem: before i did any cutting of wires, i jumped the correct relays. highbeams worked... no lows...at all. so i took out the lights and checked the voltage at the plugs. no juice to the low beams... any idea whats up? ive tested eveything, and it should be working. i thought maybe i blew a fuse, but no... any thing i could be missing?