Race Skids Now has wheel spacers

[ejnight]

Sweet deal buddy! Might pick some up for the front.

BTW- love the new signature pic!

Thanks, let me know I have a few sets ready to go.

[DREWHALL]

Should see if you can make a hubcentric 5mm. The 5 is the problem child, it pushes the wheel out just far enough to not sit on the shoulder of the hub, which should obviously be holding the weight of the car. Good prices though!

[iamsam]

Should see if you can make a hubcentric 5mm. The 5 is the problem child, it pushes the wheel out just far enough to not sit on the shoulder of the hub, which should obviously be holding the weight of the car. Good prices though!

It does? I am pretty sure the hub is a good 10-15mm, unless you are talking about the chamfer within the wheel bore being too large to allow the bore to mate to the hub concentrically....

[ejnight]

It does? I am pretty sure the hub is a good 10-15mm, unless you are talking about the chamfer within the wheel bore being too large to allow the bore to mate to the hub concentrically....

I agree 5 is fine with out lip and there would be no way to make one with a lip.

[Raxe]

Good product!

[e30Rob]

I agree 5 is fine with out lip and there would be no way to make one with a lip.

Actually you CAN make the 5mm with a lip...just not a 57.1 lip. If the Center bore of the wheel is larger than the hub bore there is no complication.

The E30's hub centric section protrudes 13mm......IF machined properly the tolerances are there to allow for you to achieve a hubcentric spacer as thin as 10mm, an i stress properly.

-Rob

[mr.vang]

what happen to the u-brace for the skid plate?

[Roysneon]

Now you need to make 4x100 to 5x120 adapters.

[ejnight]

Now you need to make 4x100 to 5x120 adapters.

No thanks

[b*saint]

I want a set 5 x 120 out of Hastelloy B3, 13.45mm thick (+- .02mm) for an E36. Shoot me a quote.

[CabbE30]

Im gonna buy some soon! This is great!

[ejnight]

I want a set 5 x 120 out of Hastelloy B3, 13.45mm thick (+- .02mm) for an E36. Shoot me a quote.

sorry what I have is what I have.

[ROLLingKING]

Eeyy. whats up!?

So im ready to get some of these 20mm for the rear! i mean like i will paypal u today if i hear back.lol
Im just wondering if I do this for the rear, will i be putting added stress on other parts. I cant think any problems it would cause other than needing an alignment. but you never know until you find out. ive never had spacers so someone please educate a brotha on the longevity of these.
cause my 15x7 TRmotorsports with hr sport springs need better stance asap.lol
Please and Thank you!

[ejnight]

Eeyy. whats up!?

So im ready to get some of these 20mm for the rear! i mean like i will paypal u today if i hear back.lol
Im just wondering if I do this for the rear, will i be putting added stress on other parts. I cant think any problems it would cause other than needing an alignment. but you never know until you find out. ive never had spacers so someone please educate a brotha on the longevity of these.
cause my 15x7 TRmotorsports with hr sport springs need better stance asap.lol
Please and Thank you!

.

ITs all good. bolt them up and roll on

[MattAvino]

I have a huge box full of mercedes benz lugs, most of em are longer than bmw ones, i think they will work with these.