Cliffs for those of us who can't read the dyno screen?
Edit: post the curve?
Buying Hella Lights Turned Into One Hell-of-a Adventure
Collapse
X
-
^ thanks guys. The dyno pull on post #64 is the update of the actual motor running strong. I suppose I'm skipping ahead in the story, but I'd figured I'd spare everybody of the story telling and fast forward to the end. It was quite the process and experience.Leave a comment:
-
Don't know how I missed this. Very entertaining read, you painted a very good picture of your evening I felt as if I was there. Keeps us updated!Leave a comment:
-
Hadn't seen it before, but read through and enjoyed it. Glad you didn't end up locked in a cellar only to be eaten a la The Road. Thanks for taking the time more than a year ago.Leave a comment:
-
I figured I'd resurrect this with a long overdue update. I hope some of you dudes are still lurking around here.
Leave a comment:
-
Here you go.
I took these last night after my trip to Schneller. I talked to Mike Morris (owner of Schneller) at length yesterday. I wanted to learn more about this set-up from him since he used to work with Pete McHenry. He recalls that it will produce a lot of power and felt it would be happiest on the track. He suggested, like WanganStyle suggested, that I convert it to vanos. I've done a lot of research on this setup, (m50 stroker, because of the s50 block, with s50 exhaust cam and schrick intake cam) and it seems that with these cams the engine acts/feels like it has vanos. It allegedly dials in the power at 3,500 and pulls hard through 7,000. I would love a lopy, gurgling American Muscle sound under my e30 hood!Leave a comment:
-
I admire your care for detail and desire to do things better than right the first time. Two big factors for that to happen are time and money - I think I'm patient enough to wait it out, I'll see if this is within my budget.my suggestion:
tear it apart. its been sitting too long to have gaskets worth using in this time and era. this way you can know what is inside.
see the crank casting number
check the rods
check the pistons and bores
pull the head- send it to get tanked
new head gasket and upperbottom gaskets. check the rod bearings/mains, replace if needed
just because its been sitting forever does not mean you should just run it.
Did you buy the $40 booster from the person in Hampton? The community around here has been helpful and in large part encouraging - pleasant surprise.Great Story, seems like theres tons of these "Mikes" living out here in New England. Having had 6 e30s, I've had my share of experiences with friendly folks from all around here (I live closer to Boston, MA). As a matter of fact just yesterday night I happened to be picking up an IX Booster in an attempt to start bringing together some 24v parts, turns out the guy who was selling it lived in a similar dark and barren NH side road. The best part is, hes one of the few with a 1988 325ix and a functional s52 transplant sitting in his driveway. Ended up selling his original booster and went to manual brakes due to his intake manifold mayhem.
One of the best parts about these cars is the people you meet along the way, very cool.
Good luck with the engine findings! :up:Leave a comment:
-
I still don't know what 'tl;dr' means. Fuck, I'm like 17 going on 70.Cool Story. It definitely looks like an m/s50 from the picture, though it's hard to tell. Definitely not an s38 though.
On a side note, it's sort of sad the amount of people who are too lazy or stupid to read this. And the fact that they need to post 'tl;dr' in the thread too, like we actually care that you didn't read it. It's actually a well written story.
Fuck I'm getting old.Leave a comment:
-
Great Story, seems like theres tons of these "Mikes" living out here in New England. Having had 6 e30s, I've had my share of experiences with friendly folks from all around here (I live closer to Boston, MA). As a matter of fact just yesterday night I happened to be picking up an IX Booster in an attempt to start bringing together some 24v parts, turns out the guy who was selling it lived in a similar dark and barren NH side road. The best part is, hes one of the few with a 1988 325ix and a functional s52 transplant sitting in his driveway. Ended up selling his original booster and went to manual brakes due to his intake manifold mayhem.
One of the best parts about these cars is the people you meet along the way, very cool.
Good luck with the engine findings! :up:Leave a comment:
-
my suggestion:
tear it apart. its been sitting too long to have gaskets worth using in this time and era. this way you can know what is inside.
see the crank casting number
check the rods
check the pistons and bores
pull the head- send it to get tanked
new head gasket and upperbottom gaskets. check the rod bearings/mains, replace if needed
just because its been sitting forever does not mean you should just run it.Leave a comment:
-
I didn't realize just how good of a deal it was until I started searching online - used were $200 and up and some places new were still $575.
I'll take some pictures of the motor this weekend.
I got an m50 nv head with cams etc. on an s50 block - built about 12 years ago and hasn't been in a car since. It came with exhaust manifold, intake, throttle body, a chopped wiring harness, and allegedly an a/c bracket but I'm not sure it even fits on the engine... I suppose I should update the story.
Thanks for reading, I'm glad you liked it!Leave a comment:
-
So you got a M50 nv for $500, did any of the accessories come with it?Leave a comment:

Leave a comment: