anyone have pics of an m30 afm installed? What did you use for a bracket. I'm going to fab something up tonight but wanted to see what's already been done.
-
"Modern cars may be able to outgun it, but few can match its character, its motorsport spirit, and the way it plasters a huge grin on your face at any speed." - Patrick George
1988 M3 - Track Rat
1989 325iC M50 Vert
1989 325i Coupe
1991 318is
1995 318ti Club Sport
2006 330i e90
2008 Tundra Crewmax -
talk to mr. Wells. afaik he had some bracket or something.
Kyle1988 M3, 97 840, 99 XJ
DILLIGAF -
Comment
-
thats a pretty good lookin setup u got there.
Kyle1988 M3, 97 840, 99 XJ
DILLIGAFComment
-
Hell that's easy enough. Where did you get your elbow to replace the boot and the fittings to put in the side of it?
"Modern cars may be able to outgun it, but few can match its character, its motorsport spirit, and the way it plasters a huge grin on your face at any speed." - Patrick George
1988 M3 - Track Rat
1989 325iC M50 Vert
1989 325i Coupe
1991 318is
1995 318ti Club Sport
2006 330i e90
2008 Tundra CrewmaxComment
-
That's a pic from Dave's cabrioComment
-
i used the stock box, and cut out all the parts not needed, just enough for the mounting rubbers, and to give it a little strength.
but that does look alot more bling--nicer--except the duct tape on the coverComment
-
dang I hate how the M42 has a oval intake mani inlet....Do these work w/ M42's...or what would be a nice upgrade for a M42??///Alpinweiß II 24v 91' 318is, Alpinweiß III 99' 323i, 04' Yamaha R6 SE for sale, 00' VW GTi, 83' El Camino BURNED, 01' P71sold, 92' Miatasold
Comment
-
thats not my setup, just a good example, i plan on doing something similiar.
I believe he just had a that piece custom bent for him, modified to connect to the ICV, I also believe something simliar to those plastic parts can be found in the plumbing section, used on PCV drain pipes.
Right now im using the stock airbox.Comment
-
Thanks guys. I don't have the stock box in mine so I'll have to fab up a bracket, shouldn't be an issue though.
"Modern cars may be able to outgun it, but few can match its character, its motorsport spirit, and the way it plasters a huge grin on your face at any speed." - Patrick George
1988 M3 - Track Rat
1989 325iC M50 Vert
1989 325i Coupe
1991 318is
1995 318ti Club Sport
2006 330i e90
2008 Tundra CrewmaxComment
-
Vibrant performance 90 degree elbow...cheap!!!
Hi guys,
I made myself something similar. I went to my local speed shop and bought a Vibrant performance 90 degree elbow (I think it was 2.75 inch, but they have 3 inch too in polished aluminum...can't remember...my car is in storage 4 hours away). Anyway, it cost about $40 Canadian. I drilled a one inch hole in it, and put a one inch rubber grommet from home depot (couple of bucks for a few of them), and the hard plastic piece from the BMW intake plugs right into it. Then I ordered the same silver silicone connectors online from the same guys that did Dave's (weapon-R). The only difference is that I haven't installed the M30 AFM yet.
I can get pics, but it will take a while.
MarkComment
Comment