I'm trying to avoid paying $100 for this, or whatever it may cost me ;-)
Sent from my Samsung Note 3
Help...broken key in ignition
Collapse
X
-
-
The key was just in there..I guess number 1? Steering wheel is locked..I'll take a look again to see if there's any portion sticking out that I can grab with pliers or something.. how about the glue method?
Sent from my Samsung Note 3Leave a comment:
-
Is it totally flush with the cylinder, or can you grab it at all? I'd try the tiny needle nose pliersLeave a comment:
-
I don't see either method going over well, especially if it's in there pretty deep.
When I was 16 I worked for a locksmith as a summer job. I remember seeing him use these key extractors to get it out. Basically he stuck em in there, twisted each handle a few times and out the key came. Here's somewhere you can get em from
Either that or you can call a locksmith and they'll remove the key for you. Probably cost $100 though.Leave a comment:
-
What position is the key in? If it is in the first then you should be able to pop the whole lock out. Otherwise, try to pry it out using two small, but strong pins or allen wrench.Leave a comment:
-
Has anyone tried to do either method? and was successful
Sent from my Samsung Note 3Leave a comment:
-
tiny drill bit. you affectively try to catch the missing section with the bit (by hand) and then pull it outLeave a comment:
-
Help...broken key in ignition
Half the key is broken in the ignition and the other half I have..I have second key for the car, I just need to pull the broken portion out..what's the best easiest/method for this? Any help would be appreciated..thanks
Sent from my Samsung Note 3Tags: None

Leave a comment: