Proper auto wiring tools and supplies

[GDA]

Many searches and not a lot of consolidated info on this topic.

I am about to build a swap harness and would like to acquire proper tools that work really well all the while providing a factory look to the end result.

Also, based on actual experience, where does one acquire or source the supplies to have on hand to build/repair automotive wiring and harnesses? I would appreciate all the input you can share on what you use and what your preferences are.

Just to clarify, talking crimpers, cutters, plugs, pins wire supplies and etc. I have multimeter and other electrical troubleshooting tools. Thanks

G

[cwatt]

I'm also interested in this. I've been considering re-wiring my entire car. I have a lot of broken connectors, rusted ends, and brittle wire casing. I'm just not sure if the wire at my local Princess Auto is quality or not.


- C

[TurboJake]

It's not really a matter of hardware and supplies, it's how tedious, careful, and detail oriented you are doing it. All you really need is a wirecutters and a pair of needle nose pliers. Sometimes a soldering iron, which a $15 radio shack (hehe) 15 watt iron will do you plenty.

Cut as little as possible. Reuse stuff and wires where you can (Except pins/plugs/degraded crap. Just get those OEM).

[GDA]

It's not really a matter of hardware and supplies, it's how tedious, careful, and detail oriented you are doing it. All you really need is a wirecutters and a pair of needle nose pliers. Sometimes a soldering iron, which a $15 radio shack (hehe) 15 watt iron will do you plenty.

Cut as little as possible. Reuse stuff and wires where you can (Except pins/plugs/degraded crap. Just get those OEM).

Understand but really asking for the go to source(s) for plugs, factory (color matched and proper gauge) wiring etc.

Just looking for input from those who have experience.

[AndrewBird]

Connectors/pins are available from the dealer. For wire, there are several sources. I use WaytekWire.com for a lot of things.

[Das Delfin]

(hehe)

I used to work for them and deal with their bullshit take on how to treat employees and I have to say they had it coming.

Although one time I complained to HR about the district manager and was interviewed by the HR lady and had the chance to bone her... man that was weird.