Q about Mtech II wheel

[bmws50b30]

anyone here installed an MTech II wheel on an airbag car/steering column? I installed mine but it only does a 1/4 turn then it hits on something. But when I installed my MOMO wheel and hub, I have no problems. Maybe someone can help me out here. thanks

george

[gazellebeigem3]

hi george!

[bmws50b30]

hi george!

STFU!

yes i did put washer/spacer before the large nut. i even put a 3-5mm washer behind the wheel and the signal return thing is still hitting something.

[PeaveyBassist]

On my mtech1 wheel it did the same thing. On the back of the wheel, the signal return thing screws into the wheel in 2 places and also has a male plug on it to plug into the horn part. I think a big piece of that was catching on something. Look into that. If it hits you can just dremel it down or break it. It will stay in place even without being screwed in.

Will

[MR 325]

Are you running the needed spacers on the steering colum?

[bmws50b30]

Are you running the needed spacers on the steering colum?

yes i am that's why i have no problems when using my momo wheel and hub.