Announcement

Collapse
No announcement yet.

The new 335i on the dyno! (vid too!)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by e30sd
    i'm on what i like to call beer number three...
    lol - I need a beer.

    Comment


      #17
      Originally posted by Bimmerfanatik
      As for "bi-turbo" versus "twin-turbo" I'd like to see some form of proof that bi-turbo is reserved solely for sequential setups, and twin reserved for v-based engines with seperate cylinder banks.
      Bi-turbo usually refers to two equal-sized on two separate banks. Which is the what the 335i uses--cylinders 1-3 and 4-6 have separate manifolds and turbos.
      Mercedes uses the "bi-turbo" designation for their FI V12 motors. Then again, Porsche uses "twin-turbo" for their flat six motors, with equal-sized turbos.
      '91 318is
      sigpic

      Comment


        #18
        Originally posted by Brew
        Bi-turbo usually refers to two equal-sized on two separate banks. Which is the what the 335i uses--cylinders 1-3 and 4-6 have separate manifolds and turbos.
        Mercedes uses the "bi-turbo" designation for their FI V12 motors. Then again, Porsche uses "twin-turbo" for their flat six motors, with equal-sized turbos.
        So Merc uses "bi-turbo" on non-sequential setups - that's what I thought :)

        I'm gonna go snail power soon...mmm.

        Comment


          #19
          I thought twin-turbo is where both turboes feed into the intake where as with a bi-turbo, one turbo feeds into the other turbo, which then feeds into the intake.

          I've never heard of someone using two different size turbos before. Seems kind of weird. Although I have heard of superchargers that ran off of oil pressure...

          Comment


            #20
            Originally posted by Eurospeed
            Well, I ask because I remember when the Audi RS6 came out, it was always referred to as a "Bi-turbo V8".
            oh man rs6, i drove one once, there sick, but it was only at crystal cove (solca) out and then around. but yea i belive all audi's or atleast most oh them have biturbos. dunno the diffenerence i thought they were the same
            Originally posted by blunt
            and remember, just because you like to suck cock, it doesnt make you gay

            Comment


              #21
              The difference between twin and bi turbo is the same as the difference between mac and cheese and macaroni and cheese. Nothing.
              Ma che cazzo state dicendo? :|

              Comment


                #22
                I have a friend that recently bought a barely used 04 M3... He considered the 335i, but figured it was too tame in comparison to the M3, and the M3 has long been his dream car. He spent roughly $50k on a 04 M3 6 spd vert with <5k miles. You think the 335i brand new would've been a better buy?


                I think the 335i just busted a nut all over the E46 M3. I think I soiled myself watching that dyno.
                Claus Luthe is my hero.

                Comment


                  #23
                  Very nice to say the least.... I wonder what the warranty service will be like....
                  Slicktop City!

                  Comment


                    #24
                    I would like to have seen BMW go with VVT using just one turbo to eliminate the lag rather than twin turbo. (or at least I'd like to know why they didn't). VVT= variable vane technology. Basically, the vanes in the turbo change their angle to, in effect, change the size of the turbo through the rpm range. Porsche recently went to this and turbo lag is essentially non existant.

                    Comment


                      #25
                      Originally posted by NitroRustlerDriver
                      I thought twin-turbo is where both turboes feed into the intake where as with a bi-turbo, one turbo feeds into the other turbo, which then feeds into the intake.
                      This is what I understood.

                      Originally posted by NitroRustlerDriver
                      I've never heard of someone using two different size turbos before. Seems kind of weird. Although I have heard of superchargers that ran off of oil pressure...
                      Say WHAT???

                      Comment


                        #26
                        [quote=Eurospeed]This is what I understood.

                        [quote]

                        No. That would be some serious turbo lag. Bi turbo and twin turbo means there is two turbos that either spool together or one small one that spools quicker while the bigger one is spooling up. Think 1jz-gte vs 2jz-gte.
                        Ma che cazzo state dicendo? :|

                        Comment


                          #27
                          Originally posted by ldsbeaker
                          Very nice to say the least.... I wonder what the warranty service will be like....
                          Service Clerk - " You turned up the boost didn't you? "
                          Owner - " You aren't supposed to? "

                          Those things are gonna be awesome, will be awhile before I drive one though I bet. I wonder what sort of power you can get from the stock turbos alone.
                          Project Thread | Instagram | Phoenix, Arizona Events Thread

                          Comment

                          Working...
                          X