325e 323i

[viali8]

Does any one know where i could find some good literature about swapping the 323i head onto an eta block? thanks Matt

[e30_325es]

Matt- It's basically the same as swapping a 325i head on, only you are using a different head. You'll need 325i intake, throttle body, intake boot, afm, icv, fpr, crank pully and sensor, engine wire harness, injectors, and ecu. Check strictlyeta.com or .net (I forget) for a write up on swapping the 325i head on.

[viali8]

Thanks for the info. Matt

[browntown]

somewhere here, there is a scanned article from a british magazine about the easy stroker. The brits have those heads lying in heaps on the side of the road, so they talk about it like the poormans power 2.7. I can't find it quickly, but I'm sure someone knows the link.

[browntown]

http://www.r3vlimited.com/board/showthread.php?t=60048

[viali8]

thanks. found some more info. on the swap. here is the link.

http://209.85.165.104/search?q=cache:CDtLoZNVfJ0J:bimmer.roadfly.com/bmw/forums/e28-lounge/6151178-1.html+euro+323i+e30+camshaft&hl=en&gl=us&ct=clnk&cd=6