Vader seat install

[e30ryan///m3]

does anybody know what it would take to put vader seats from an e36 into an e30 m3? What brackets and sliders do I use? I'm considering doing this instead of redoing my stock seats.

Thanks,
Ryan

[KenC]

Just use the brackets/sliders on the vaders. You will have to fabricate adapters though for the e30 bolt pattern.

I love my vaders.

[e30ryan///m3]

Thats what I thought. did you just drill/weld the stock brackets to get them to work?

[Mastrcruse]

Ryan would you do it yourself? Or would you have someone else do it?

[KenC]

Thats what I thought. did you just drill/weld the stock brackets to get them to work?

I made some adapter plates out of 1/4" steel flatbar. I basically drilled two holes in a piece of bar the correct distance away from eachother.

[rede30]

i am just going to drill two holes for my e46 sports. Only two because the seat belt slider bolt hole and front hole lines up.

[e30ryan///m3]

Ryan would you do it yourself? Or would you have someone else do it?

I would do this myself.

[B-e30_e46]

anyone know how hard it is to get heated vaders to work with an e30 that had heated seats? probably not plug and play, right? wish it was... how tough to install?