Announcement

Collapse
No announcement yet.

Need some help NOW

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Need some help NOW

    I installed a crach free dash yesterday - and now my obc and tach dont work. What did i mess up or forget to reconnect?

    Also, I installed some new front speakers. The old ones had a ground cable which i just left unattached to the new speakers. Now I'm getting no sound from the front. Whats up with this?
    "We praise or find fault, depending on which of the two provides more opportunity for our powers of judgement to shine."
    Tags: None
    #2
    BTW the cluster is in the car.
    "We praise or find fault, depending on which of the two provides more opportunity for our powers of judgement to shine."

    Comment

      #3
      Patrick, I promise that was not a ground wire on the speaker.

      Premium sound has 4 wires connected to the stock mid. 2 in, 2 to the tweeter.

      On the OBC/tach issue, I have no clue.

      GL!
      Luke

      Closing SOON!
      "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

      Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

      Thanks for 10 years of fun!

      Comment

        #4
        So, if i dont want to use the tweeters just connect the 2 in?
        "We praise or find fault, depending on which of the two provides more opportunity for our powers of judgement to shine."

        Comment

          #5
          There is a green plug on the back of the cluster that i can not find wires for - is this the cause of my obc issues?
          "We praise or find fault, depending on which of the two provides more opportunity for our powers of judgement to shine."

          Comment

            #6
            Originally posted by psloan View Post
            So, if i dont want to use the tweeters just connect the 2 in?
            'xactly. Look carefully at the speaker if it is a premium. You will see which 2 terminals go to the woofer.

            I cant remember which 2 wires plug into the speaker, though.

            Luke

            Closing SOON!
            "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

            Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

            Thanks for 10 years of fun!

            Comment

              #7
              Originally posted by psloan View Post
              There is a green plug on the back of the cluster that i can not find wires for - is this the cause of my obc issues?
              From Fred Kims site
              Take the new wiring harness and plug its yellow connector behind the cluster, then wire it through the dashboard and plug the green connector to the back of the OBC. Make sure the black tab is down to lock the connector in place. At the other end of the harness, you will see four connectors (black, green, blue, and white). Wire them down the left side of the dashboard.


              BLACK CONNECTOR: Plugs into the right slot of the door gong and is used for low temperature and maximum mileage features.

              GREEN CONNECTOR: Plugs into the fuel pump connector and is used for the CODE feature. Also supplies a feed to the auxiliary horn (which must be added); not necessary if you are don't want the feature active.

              BLUE CONNECTOR: Plugs into the turn signal stalk and is used for the OBC remote control feature. If youd don't install the turn signal, then you don't need it.

              WHITE CONNECTOR: Plugs into the ambient temperature sensor.
              Continuous For Sale Thread
              323i s50

              Comment

              Previous template Next
              Working...
              X