European "Smiley" Part Number?

[JamesE30]

I know there is allready a couple of threads asking these sorts of questions.
But i could not get a straight answer out of them.

SO,
I want!
Smoked smiley headlights.
Low and high beams.
Hella or bosch

I need part numbers and names for everything that is required for a complete swap of early sealed beams for late smileys.

SMOKED OR NON SMOKED

I'd prefer to smoke them myself to save cost but if you have part numbers them hit me.


YOU MUST BE 100% POSITIVE THEY ARE CORRECT.


Thanks guys
James.

[threlevenguy]

bma parts?

[JamesE30]

? im not familiar with bma parts.

link?

[schmidty]

http://bmwfans.info/ :D

[td325ic]

If you're going to buy them NEW then I think you should just buy them smoked to begin with. The price difference between smoked and clear is not enough to make it worthwhile to do the smoked mod yourself.

Places to buy:

http://www.abrahamsmotorsport.com/e30.htm

http://www.turnermotorsport.com/html...ead&TailLights

Now if you decide to buy them USED then it may be worthwhile to do it yourself or just find some nice condition used smoked smileys.

[M42Technik]

Yes, buy them from that website above, very reputable place to shop. It wouldn't be cost-effective to just get the part numbers and head to BMW, and I bet it even might cost more.

Again, you can always look up the part numbers yourself with schematics on either of these sites:

https://www.bmwfans.info

www.realoem.com

The second link has a price guide...here is a link to the lights and their part numbers though, just to help you out moreso...

http://www.realoem.com/bmw/partgrp.d...63&hg=63&fg=05

Go to the lighting section...that will give you prices on all the parts you may want...they are pretty correct after buying a few parts and comparing prices from here to that site...can't say about Australia though.

Best bet is that site mentioned to get them from! Good luck!

[JamesE30]

Thanks alot guys, i only ask because i may have access to them at wholesale price.
though ill probly end up pulling a DIY