Will this engine lift support an M50

[Jonathan Chan]

http://www.harborfreight.com/cpi/cta...emnumber=32915

If so, gonna pick it up next weekend :)

[Kruzen]

190KG for the m50, you do the math.

[DarkWing6]

190kg = 418.8783lbs

You will be fine.

[Mike325]

M50 weighs 250-300 pounds. You are set to go.

Edit: M50 weighs over 400 LBS? M30 weighs more than the M50 and the M30 only weighs 300 LBS.

[Jonathan Chan]

Thanks guys. I didn't know the M50 weight off hand.

[blunttech]

i hate those 3 wheeled things. they will do the job but i like 4 wheeled units a lot better.

[thectrlguy]

I agree, spring the extra couple bucks for the 4 wheel version......

i hate those 3 wheeled things. they will do the job but i like 4 wheeled units a lot better.

[MR 325]

i hate those 3 wheeled things. they will do the job but i like 4 wheeled units a lot better.

Agreed.

That said, I have my S50 on the same stand Jon linked above.

[Jonathan Chan]

Agreed.

That said, I have my S50 on the same stand Jon linked above.

To me it's a moot point, as long as the thing doesn't tip over when I'm using it, then I'm cool.

The motor will be on the stand for a while anyways, since I need to source the parts I'll be using to build up the motor.

[benDASHDASH]

http://www.harborfreight.com/cpi/cta...emnumber=32916

i have an m20 on this one.. works quite swell

[maniacmatt]

I will add support to the 4 wheeled is better motion.

I just finished building my m20 on one of the three wheeled ones and wish I would have got a 4 wheeled one. Anytime you have to turn the engine over you have to stand on the side of the engine stand to keep it from tipping.

[ldsbeaker]

I think I might get that 4 wheeled 1000 lb. one... Nothing like overkill on something like that.

[BDSax]

i dont trust those shitty 3 wheeled stands either. i have to roll my engine outside too so i can vision disasters happening.

[Mastrcruse]

http://www.harborfreight.com/cpi/cta...temnumber=4420

I thought the m20 weighed over 1500lbs...just get this one.
If it doesn't how do I add weight so I can make sure my car doesn't lean as much?

[golde30]

Agreed.

That said, I have my S50 on the same stand Jon linked above.

me to. and it DOES lean. its pretty scary looking, and dont even try to rotate it by yourself. BUT i have had mine on this stand for like 3 months without it breaking.