Need motor help in Vancouver/Portland

[LeDevil]

Well I need to get my valves adjusted, they're starting to tap and I really don't wanna pay a shop the rate they want(the thought of me being bent over just doesn't please me). So I was wondering if any of you fellow chaps in Washington or Oregon would wanna help me out and I could slip you some cash and beer. Thanks in advance :up:

[KenC]

Really easy to do yourself. Just buy a Bentley manual. It's all described in there. You just need an allen wrench, a 10mm wrench, and a set of feeler gauges.

[StereoInstaller1]

and a short chunk of wire to bump the starter over using the diagnostic port, preferrably with a small push button switch.

[KenC]

and a short chunk of wire to bump the starter over using the diagnostic port, preferrably with a small push button switch.

I usually just put the car in 5th gear and roll it to move the cam. But if you're pressed for space, I would definitely do the starter jump.