Announcement

Collapse
No announcement yet.

Seafoam FTW!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by Fanzotti View Post
    Should you do it in more than one spot? Or is one sufficient? Would love a pic of highly reccomended places to inject seafoam.
    The brake booster is about the best place to go. Most vaccuum tubes come directly off of the manifold and anything that gets sucked into it will make its way into every cylinder. Every time a valve opens on one of the cylinders and the piston goes down, its sucking in anything that is in that manifold. I think that the only time this would not apply is if you have a split engine that has 2 carburators or something like that.

    Comment


      #17
      Originally posted by -Javier- View Post
      i have done 2 bottle in one shot.....
      I hear you on two bottles. My question was more along the lines of is it better to put it in more than one place to get the best results? I.E. a vacuum line and the spark plugs holes. Would like to know what has been the best technique for injecting into the M20 to yield maximum results.

      Comment


        #18
        I remember when the old school guys first discovered Seafoam. There were a bunch of threads exactly like this one. That stuff just plain works.

        I have had a can of it in my cabinet at work for a few months now and I keep forgetting about it, but after reading this thread, hopefully I'll remember. It's good stuff!
        sigpic

        Comment


          #19
          did you guys have to change your plugs afterwards? I just put in new ones and forgot to use my can of seafoam... don't really want to foul out a new set.
          Jay

          Comment


            #20
            I dunno, maybe it's just a placebo effect... I didn't notice any difference when I tried it last year, although it was cool to see a huge cloud of smoke going through my neighborhood :D. I think I scared some old Viet ladies walking by.

            Still had lopey idle and whatnot. If you're looking for a cure in driveability issues, ur better off saving money for a tuneup. Buying a new distributor rotor helped a lot more than teh foam ever did. If you already have new parts then I guess you should try this.
            Last edited by brandondan1; 08-12-2007, 10:57 PM.


            91 318is

            Comment


              #21
              I would try this in my daily driver 325e, but I'm afraid Seafoam would be the straw that breaks the camel's back and that'd be the end of the 120,000 mile timing belt.

              Comment


                #22
                Seriously... change that belt. It only took me a few hours to do a FULL tuneup on my eta the other day and cost me 250 bucks. Should be good for the most part 50k miles.
                :: PNW Crew ::
                '87 325 4dr, '74 2002

                Comment


                  #23
                  Originally posted by backtrail69 View Post
                  Seriously... change that belt. It only took me a few hours to do a FULL tuneup on my eta the other day and cost me 250 bucks. Should be good for the most part 50k miles.
                  I've changed a few timing belts in my day. I decided I was either going to kill my 325e one of two ways:

                  - Drain the motor oil. Fill with Redline MTF. Run 'till dying.
                  - Just not change the timing belt.

                  Option B was the one I decided on.

                  Comment


                    #24
                    Seafoem worked for my car. I did it through the ICV hose.
                    BimmerHeads
                    Classic BMW Specialists
                    Santa Clarita, CA

                    www.BimmerHeads.com

                    Comment


                      #25
                      Originally posted by fretburnr View Post
                      did you guys have to change your plugs afterwards? I just put in new ones and forgot to use my can of seafoam... don't really want to foul out a new set.
                      Anyone have an opinion on this? Is it worthwhile to put in an old set of plugs?

                      Comment


                        #26
                        Originally posted by Ben Carufel View Post
                        I've changed a few timing belts in my day. I decided I was either going to kill my 325e one of two ways:

                        - Drain the motor oil. Fill with Redline MTF. Run 'till dying.
                        - Just not change the timing belt.

                        Option B was the one I decided on.
                        Why would you want to kill an E30?

                        If you hate it so much why not give it to some kid that would respect it rather than going out of your way to destroy it?
                        Last edited by Fanzotti; 08-13-2007, 12:57 AM.

                        Comment


                          #27
                          Originally posted by Fanzotti View Post
                          Why would you want to kill an E30?
                          You've never spent any time in/around my green 325e, I see.

                          Comment


                            #28
                            i was reading this thread and it reminded me i needed to do it, so i went out and got some, put it in 1/3 of a bottle at a time and repeated the steps three times. i got black smoke all three times. i think im going to go get another bottle and do it some more. do i need to keep doing it until there is no more or considerably less black smoke or is 1 bottle good enough. btw my engine is in very good condition, runs smooth as hell, has lots of power, seems like it cant get any better but when i put this stuff in i noticed that it just seemed more healthy and quieter. cant really explain it but i think it helped.

                            Comment


                              #29
                              Originally posted by Ben Carufel View Post
                              You've never spent any time in/around my green 325e, I see.
                              That's a good point. I spoke too soon. I'm guessing actually having knowledge of the car may help me realize why you are trying to kill it. I should thank you, it will be nice to know how far a timing belt can be pushed.

                              Comment


                                #30
                                Originally posted by Ben Carufel View Post
                                You've never spent any time in/around my green 325e, I see.


                                wanna sell it :D
                                Last edited by Lsb_E30; 08-13-2007, 01:05 AM.

                                "Give me that money so I can give you that moneeeeyy..."

                                Comment

                                Working...
                                X