diving board bumper removal

[aworthybrother]

how do you remove a diving board bumper? both front and rear?

[Raxe]

There are four bolts on the back side of the bumper, a pair on each side.

[threlevenguy]

its a piece of cake

[JasonC]

To add to the posts above. When you take the rear shocks out there is a bolt under the car on the frame rails for the bumper shocks. drivers side is under the heat sheild for the muffler.

[apprentice]

To add to the posts above. When you take the rear shocks out there is a bolt under the car on the frame rails for the bumper shocks. drivers side is under the heat sheild for the muffler.

Any secrets to getting the bolt out that's under the heat sheild for the muffler?

[JasonC]

Mine was simple cause i only have two glass packs in the way there. So i could unbolt the heat sheild. But you may have to drop the exhaust down to get to those bolts?

[aworthybrother]

its a piece of cake

the question is "how to" and now "how easy". thanks.

[apprentice]

Here's a link that might help you:

http://bmwe30.net/cgi-bin/datacgi/database.cgi?file=articles&report=view&ID=00120&Section=01

[kellie]

With a grinder...duh...

DIE, DIVING BOARDS!!!