Announcement

Collapse
No announcement yet.

Anyone know what these rims are?

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
    #1

    Anyone know what these rims are?

    I just went to the junk yard and found these babys!
    They feel HALF the weight of my stock ones and I sorta like the lip they have.
    What are these things?
    It said in the inside that they are from japan and are -jjx15.. <--WTF?
    These tires on the rims are 205/60/15.. but look like they can fit wider tires...
    I just want to know how wide they are... :x
    And what do you think off them?
    They are $11 each with tire, $10 w/out

    BTW: measured it with my hand and it measured out to be about 8" - 71/2''. :?


    Tags: None
    #2
    Old skool Mahle or MSW. It will say stamped or molded into them some where.
    https://www.facebook.com/BentOverRacing

    Comment

      #3
      I was looking for the stamps like crazy..

      Can't find anything exept for "Made in japan" and "wheel load 15xx"


      Can you tell me alittle bit more about these rims :o
      Like the width... :idea:

      Comment

        #4
        Oh they are made in Japan? Then the could be a Honda Prelude XX wheel 7x15 was common on 88 is Prelude's I believe was the 3rd generation. I had one while I lived in Japan 3 valve per cylinder. dual carbs on the XX version.
        https://www.facebook.com/BentOverRacing

        Comment

          #5
          Thank you

          I'll look for a honda forum and ask there. :D

          Comment

            #6
            Alright!!
            Found what they are... they are Rikkens and they are from Mazda..
            They are 7x15 :D
            No comments?

            I think they're kinda ugly, but they are bigger :twisted:
            These one in the pic. are 16s but same thing..
            I can fit 225 now!! :shock:

            Comment

              #7
              they look like oldschool Enkei's to me.
              FOKAI DA'MA'SHI'I ENSANE GRAPPING INT.

              Comment

                #8
                If they are Rikkens then they are Rikkens not by Mazda. As Rikken used to make wheels for across the board most Japanese brands.

                What is the et on them. Are they straight? How much do they want for them and how much van you refinish them for.

                In general I never buy wheels from US strip yards as they ask way to much for wheels. Used wheels should not be more than $70 a piece but I go places and they say 200 a wheel, get real.
                https://www.facebook.com/BentOverRacing

                Comment

                  #9
                  No, they are really cheap...

                  $11 each w/ tire OR $10 each w/ out tire... I don't think that's a bad price at all.
                  I don't know the ET but they didn't seem to rub on the junked car, there was no visible scuff marks anywere..

                  They are alittle bit dinged up, but they are strieght...

                  One thing that's bothering me is that the ET might be way off so that I can only run 205 and anything bigger will rub... :oops:

                  Now I just need to find the ET.... ;)

                  Comment

                    #10



                    Now I've been told that they might be fiero rims... :shock:

                    Edit: That can't be.... Fiero has 5 lug...

                    Comment

                      #11
                      ok ok.... They are about 40-42 offset..
                      I've been told..

                      Will that still fit wide tires?
                      I don't know the stock offset..

                      Comment

                        #12
                        They look like old school Speedline wheels, which are very rare.

                        SOLD: My feature http://www.stanceworks.com/2012/04/a...ss-bmw-e30-m3/

                        Comment

                          #13
                          I was also told that they are SSR supermesh... :?
                          WTF are they?!

                          I don't know... I'll get them tomarow either way.. ;)

                          Comment

                            #14
                            Hey, did you get your name from that German Metal band? :P
                            Those guys are the shit, I have there CDs.

                            Comment

                              #15
                              Did you find these on the vortex?

                              I bombed Korea every night.

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X