Chevy S10-front lip?

[e30nv]

So, I was driving down the highway and set my eyes on a front lower lip from a Chevy-S10 and wondered, if anyone has had the same idea or have you ever modified one to look like an IS lip on your E30?. I don't have any pics but I think any of you photoshop experts can probably whip one out and try that MOD., the pick up (S10) was a 1988-1990 and justfound out that, the old school blazers have those front lower lips too.

[rThor432]

Oh boy.

[M42Technik]

Hit a junkyard, grab one, and test fit it.

Subscribed.

[JasonC]

Hit a junkyard, grab one, and test fit it.

Thats what i was going to say. And they should be easy to find since they are on 82-93 S-10's and what ever year the S-10 blazer came out to 1994. Some of the 4x4's will have cuts in them for the tow hooks also, and some had fog lights in the later ones too.

[e30nv]

If you got any pics, post them up

[M42Technik]

If you got any pics, post them up

Of what? The Chevy S-10 lip attached to an E30?

You gotta do it first. I don't need one. Maybe if you send ask someone to phtoshop it...but you should pioneer and be the first.

[e30nv]

Word.... I guess i'll have to do the trial and error myself, still thou if anyone can do the S-10 Lip on an E30 it would probably be alot easier, but you're right I should just ask for that to be photoshoped!

[Jordan]

Just buy a OEM iS lip already.

[fwappy]

Is this what you are referring to?

[Wishno87]

i want to see this:hitler:

[e30nv]

yeah!!

Is this what you are referring to?

[e30nv]

i want to see this:hitler:

me too..........

[Mastrcruse]

Looks like the bottom end of a IS valance for hte metal bumpered cars.

You could do the plastic weld, or however Jordan got his so nice and flush, make it look like one full piece and about 1/6 of an inch off the ground...doesn't look practical and might look like shit as a lower lip if put on a valance.

[der affe]

sort of on the same note....i have a '04 996 turbo front lower lip that i replaced because it had a little bit of scrappage on the bottom of the lip on a car i was fixing. i just couldn't throw it away, and thought i would screw around and make it fit on my e30. it is a little bit wider (just shorten remove the extra from the middle of the bumper and re-plastic weld it together) and slightly longer on the ends (also easy to shorten to fit) it attaches in a similar fashion to the reg BMW lip too.

it would end up looking like an IS lip (it dips in, in the middle like the IS )
with ducts (brake-ish) just inboard of the fog lights.

i don't think i will ever get around to doing it. anybody local want to take it and give it a try to fitting it? if you are local, after you fit it, bring it back to me and i'll bumper repair/glue it back together and reinforce it for you.

free if you want to try it. you also get some ballerstatus too, IIRC the are around $250 new since they are a Porsche part

[e30nv]

sort of on the same note....i have a '04 996 turbo front lower lip that i replaced because it had a little bit of scrappage on the bottom of the lip on a car i was fixing. i just couldn't throw it away, and thought i would screw around and make it fit on my e30. it is a little bit wider (just shorten remove the extra from the middle of the bumper and re-plastic weld it together) and slightly longer on the ends (also easy to shorten to fit) it attaches in a similar fashion to the reg BMW lip too.

it would end up looking like an IS lip (it dips in, in the middle like the IS )
with ducts (brake-ish) just inboard of the fog lights.

i don't think i will ever get around to doing it. anybody local want to take it and give it a try to fitting it? if you are local, after you fit it, bring it back to me and i'll bumper repair/glue it back together and reinforce it for you.

free if you want to try it. you also get some ballerstatus too, IIRC the are around $250 new since they are a Porsche part

Pics please!!!!!!!!