does anyone know who made the "solid" motor mount that BMP used to sell? they are alum with a urethane insert if i recall. i have them on my car and i was chasing a rattle when i found that the lower stud on the pass side was broken (craptacular!!) from the looks of the drivers side one it screws in with an allen wrench. i looked on the BMP online catalogue and i can't find them anymore and my old catalogue has gone MIA. i recall them being made or sold by someone else, i just can't remember who. i would like to get a pic of the mount off of the car if possible and see if the manufacture sells spare studs etc
-
seien Sie größer, als Sie erscheinen
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image. -
no, at least that's not what they had on the site. they are hourglass shaped, gold anodized, and i think they had a urethane insert through the center from the pics in the catalogue.
any other ideas?seien Sie größer, als Sie erscheinen
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
Call them?RIP e30 (brilliantrot '91 325i) 11/17/06 Byebye: 8/21/07
Welcome e30 (brilliantrot '90 325is) 12/23/06
DaveCN = Old Man
My signature picture was taken by ME! Not by anyone else!
Originally posted by george gravesComment
-
Sounds like you are describing the Vorshlagg motor mounts.Comment
-
-
i will tomarow (closed for the holidays i guess, no one answered the phones) i emailed them too.Originally posted by PeaveyBassist View Postseien Sie größer, als Sie erscheinen
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
nope all alum outside with a urethane insert in the middle that you can't see unless they are off the car. the shape is close, stack 2 of them on top of each other and you have the "hour glass" shape. also they are gold anodized.Originally posted by Pedro View Postlike piercede30 said, these are vorshlag mounts
they were discussed on here some time ago with a different manufacture then BMP. i remember saying "hey, those are the same mounts i have" when i saw the pictures in the thread.seien Sie größer, als Sie erscheinen
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
bumpseien Sie größer, als Sie erscheinen
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
did you look up your past posts and try to find it that way?Comment
-
I bought these from VAC Motorsports. No more torn motor mounts.:p
sigpic
88 M3,88 325ic,87 325is
e30s are like fat girls that USED to be hot, you just gotta work them out to make them hot again.Comment
-
Only torn sheet metal?Originally posted by wickedE30 View PostI bought these from VAC Motorsports. No more torn motor mounts.:p
Comment
-
I used those for the engine and new oem tranny mounts. I have not had an issue with any "torn sheet matal", and I do drive this car hard.Originally posted by bolognablake View Postsigpic
88 M3,88 325ic,87 325is
e30s are like fat girls that USED to be hot, you just gotta work them out to make them hot again.Comment
-
Originally posted by wickedE30 View PostI bought these from VAC Motorsports. No more torn motor mounts.:p
they actually look like these, but with the urethane in the middle and gold anodizingseien Sie größer, als Sie erscheinen
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
Comment