Oil Tube to block - parts sequence help needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • ldsbeaker
    replied
    oh. Just saying. The real oem pics are not really the same thing as a dirty, greasy, 20 year old engine.

    Leave a comment:


  • smcdermott326
    replied
    realoem HTML link is in above post to see the pics

    Leave a comment:


  • ldsbeaker
    replied
    Pics?
    That would really help the rest of us.

    Leave a comment:


  • Toms73NovaSS
    replied
    got it! I don't know what it originally had. However a washer up top would provide a more perpendicular edge for the oring to sit on rather than the radius-ed (Sp!) surface of the tube flange....????
    Last edited by Toms73NovaSS; 01-08-2008, 09:39 AM.

    Leave a comment:


  • smcdermott326
    replied
    but the QTY is 2....just like the o-rings...you only see the bottom one but there is a top one as well that's not shown.

    Leave a comment:


  • Toms73NovaSS
    replied
    I only see one washer. the lower one is the o-ring.

    Leave a comment:


  • smcdermott326
    replied
    Thanks for the help.

    Any idea why Realoem would show 2 flat washers if there is only 1 for the spring to rest against? Where does the other one go?

    http://www.realoem.com/bmw/showparts..._0106&hg=11&fg

    Leave a comment:


  • mudflaps
    replied
    installing it is the easy part. its cramming the 25lbs of sand into the crank case hole thats the hard part, but the gains are incredible for this mod.

    Leave a comment:


  • nando
    replied
    Originally posted by e30Matt
    Top just has an o-ring.

    Bottom goes spring, washer, o-ring from top to bottom.The washer is so the spring has something flat to press on the o-ring.
    that's right - it's been a while.

    Leave a comment:


  • e30Matt
    replied
    Top just has an o-ring.

    Bottom goes spring, washer, o-ring from top to bottom.The washer is so the spring has something flat to press on the o-ring.

    Leave a comment:


  • nando
    replied
    spring goes on the bottom, o-rings go on bottom and top. I don't remember any washers.

    Leave a comment:


  • TwoJ's
    replied
    I have to go to class right now, or I'd look it up for you. Go to www.realoem.com and look for the diagram for the intake manifold. It may be on there. It's been a while since I've done mine, but I beleive the spring goes on the bottom. Definetly double check that though.

    Good luck, that's kind of a bitch to do.

    Leave a comment:


  • smcdermott326
    replied
    yes the tube of death. It's leaking enough that I want to redo it but I am not certain it is currently installed correctly since it has been uninstalled/reinstalled several times already.

    Leave a comment:


  • mudflaps
    replied
    springloaded tube of death?

    just sell the car.

    Leave a comment:


  • smcdermott326
    replied
    That's 2 flat washers and 2 o-rings

    Leave a comment:

Working...