Well, I decided to put my 26 LB/h 4 pntall or 4 holes in each injectors, the car is runinf excesive rich wich measn or tanslate in poor acceleration.
My main question is, what color cable of the smt 6 controlls the injection (plus width or duty cycle of the injectors) and where must be tap or hook in the ECU lines, what color of wire from the ECU?
Then, most importan wich option in th eprogram control it and what numbers I should fill in the boxes or whatever to compensate it a bit? I saw a preset of the smt6 in the "injection map" up to 256 or so..but I don't really know what means those numbers and don't know how high should eb numbers in the boxes to fill.
Any help would be apreciatted.
Thanks
Diego
My main question is, what color cable of the smt 6 controlls the injection (plus width or duty cycle of the injectors) and where must be tap or hook in the ECU lines, what color of wire from the ECU?
Then, most importan wich option in th eprogram control it and what numbers I should fill in the boxes or whatever to compensate it a bit? I saw a preset of the smt6 in the "injection map" up to 256 or so..but I don't really know what means those numbers and don't know how high should eb numbers in the boxes to fill.
Any help would be apreciatted.
Thanks
Diego
