so uh, wtf do i do now?

[alpinweiB]

Went to an HPDE with Mark (markseven) and I want to try that out, so a little bit of yes and no with the S50 in the cabrio. I do love top down days like today, but I just couldnt justify a 1000 rollbar to make it okay for HPDE's... So its time for a coupe.

oh man yea its days like this i wish i had some beater ass vert to drive around. that way i could leave the top down all the time.

[VacMan]

ive been looking but i cant see the hole that you are talking about. will i be able to feel it?

No. It's about 6-8 inches to the left of the driver's side high beam when you're looking at it. You'll need a screwdriver about a foot long to reach the latch through the hole. You can barely see it in the pic below, it's the small hole in the grille to the left of the highbeam in the "slat" at the top.

[devonjordan]

Went to an HPDE with Mark (markseven) and I want to try that out, so a little bit of yes and no with the S50 in the cabrio. I do love top down days like today, but I just couldnt justify a 1000 rollbar to make it okay for HPDE's... So its time for a coupe.

[alpinweiB]

Better than you I guess....


Im doing well, just trying to sell the cabrio and get into a coupe.

good man. what is prompting you to sell the cab? don't want to waste an s52 on a cabbie?

[alpinweiB]

You can order it separately or as a complete assembly. It's cheap and easy to replace. In the meantime, the latch can be triggered with a long standard screwdriver; just look for the keyhole-shaped thing through the holes in your driver's side grille.

Tim

ive been looking but i cant see the hole that you are talking about. will i be able to feel it?

[devonjordan]

i had been great until that just happened. definitely ruined my day. aside from that im good. what about yourself?

Better than you I guess....


Im doing well, just trying to sell the cabrio and get into a coupe.

[VacMan]

You can order it separately or as a complete assembly. It's cheap and easy to replace. In the meantime, the latch can be triggered with a long standard screwdriver; just look for the keyhole-shaped thing through the holes in your driver's side grille.

Tim

[cramer]

You can just replace the handle. 2 bolts hold it in as mentioned above.

[alpinweiB]

So what your saying is....

your fucked.


HAHA, jp Whats up man, how you been?

i had been great until that just happened. definitely ruined my day. aside from that im good. what about yourself?

[alpinweiB]

i broke the handle. can you replace the handle or do you have to replace the cable when you replace the handle as well?

[cramer]

Did you break the handle or the release cable?

Either way, you can get the hood open with a screwdriver. Look near the driver's side headlight through the grill, you'll see a release lever.

[Lazr111]

1. Theres a little circular catch just on the inside of the driver side head lights. Stick a screwdriver in there, and it'll open.
2. Can't help you there.

[Jean]

Removed the lower knee-pad/panel. Hood release handle is mounted with two 10mm(iirc) bolts through the driver side speaker grill/cover.

You can also try to remove the front grill(s).

[devonjordan]

So what your saying is....

your fucked.


HAHA, jp Whats up man, how you been?

[alpinweiB]

so i bought a couple of those little rubber stoppers that go under the front of the hood to stop it from going all the way down when you close it. and i put them in, closed the hood, and tried to open it to re-adjust them and this happened:



So...
1. how do i get the hood open?
2. how do i replace the handle? isn't the whole thing one piece that's connected to the cable?